lkml.org 
[lkml]   [2022]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/6] arm64: dts: qcom: pmi8998: add smb2 node
From
On 01/04/2022 22:26, Caleb Connolly wrote:
> Add a node for the smb2 charger hardware found on the pmi8998.
>
> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/pmi8998.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index da10668c361d..b98dad166a0b 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -9,6 +9,21 @@ pmi8998_lsid0: pmic@2 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> + pmi8998_smb2: smb2@1000 {

Generic node name please, so "charger". Have in mind that PMIC
(parent's) schema might require it.

If it exists (I did not check), it should reference also your charger's
schema.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-04-02 16:41    [W:0.114 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site