lkml.org 
[lkml]   [2022]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 7/8] dt-bindings: phy: qcom,qmp: Describe phy@ subnode properly
On Mon, Feb 28, 2022 at 06:00:18PM +0530, Bhupesh Sharma wrote:
> Currently the qcom,qmp-phy dt-binding doesn't describe
> the 'reg' and '#phy-cells' properties for the phy@ subnode.
>
> Fix the same.
>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index 70e7cd75e173..f8a43acd229a 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -115,6 +115,13 @@ patternProperties:
> Each device node of QMP phy is required to have as many child nodes as
> the number of lanes the PHY has.
> properties:
> + reg:
> + minItems: 1
> + maxItems: 6

You need to define what each entry is.

> +
> + "#phy-cells":
> + const: 0
> +
> "#clock-cells":
> enum: [ 0, 1, 2 ]
>
> --
> 2.35.1
>
>

\
 
 \ /
  Last update: 2022-03-05 01:00    [W:1.638 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site