lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/8] arm64: dts: qcom: ipq6018: Fix qmp usb3 phy node
Date
Fix the following 'make dtbs_check' warning(s) by
using phy@ instead of lanes@ and by moving '#clock-names' to
sub-node:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: ssphy@78000:
'lane@78200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 66ec5615651d..ad7914e49532 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -674,7 +674,6 @@ ssphy_0: ssphy@78000 {
reg = <0x0 0x78000 0x0 0x1C4>;
#address-cells = <2>;
#size-cells = <2>;
- #clock-cells = <1>;
ranges;

clocks = <&gcc GCC_USB0_AUX_CLK>,
@@ -686,12 +685,13 @@ ssphy_0: ssphy@78000 {
reset-names = "phy","common";
status = "disabled";

- usb0_ssphy: lane@78200 {
+ usb0_ssphy: phy@78200 {
reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
<0x0 0x00078400 0x0 0x200>, /* Rx */
<0x0 0x00078800 0x0 0x1F8>, /* PCS */
<0x0 0x00078600 0x0 0x044>; /* PCS misc */
#phy-cells = <0>;
+ #clock-cells = <1>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
--
2.35.1
\
 
 \ /
  Last update: 2022-02-28 13:31    [W:0.123 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site