lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/8] dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties
On Mon, Feb 28, 2022 at 06:00:13PM +0530, Bhupesh Sharma wrote:
> Since a few boards based on QCoM qmp phy use the
> 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
> describe the ufs phy nodes, add them to the dt-bindings doc as well.

Does qmp-phy driver actually use them?

Shawn

>
> This fixes the following '$ make dtbs_check' warning(s):
>
> sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
> 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
> the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index 48cd6b6171a1..70e7cd75e173 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -87,6 +87,14 @@ properties:
> minItems: 1
> maxItems: 3
>
> + vdda-max-microamp:
> + description:
> + Specifies max. load that can be drawn from phy supply.
> +
> + vdda-pll-max-microamp:
> + description:
> + Specifies max. load that can be drawn from pll supply.
> +
> vdda-phy-supply:
> description:
> Phandle to a regulator supply to PHY core block.
> --
> 2.35.1
>

\
 
 \ /
  Last update: 2022-03-01 05:16    [W:0.105 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site