Messages in this thread | | | From | Lucas Tanure <> | Subject | [PATCH 0/3] Ensure Low period of SCL is correct | Date | Sat, 26 Mar 2022 10:22:26 +0000 |
| |
The default duty cycle of 33% is less than the required by the I2C specs for the LOW period of the SCL clock.
So, for 100Khz or less, use 50%H/50%L duty cycle, and for the clock above 100Khz, use 40%H/60%L duty cycle. That ensures the low period of SCL is always more than the minimum required by the specs at any given frequency.
Lucas Tanure (3): i2c: meson: Use _SHIFT and _MASK for register definitions i2c: meson: Use 50% duty cycle for I2C clock i2c: meson: Remove meson_i2c_data
drivers/i2c/busses/i2c-meson.c | 104 ++++++++++++++++++--------------- 1 file changed, 56 insertions(+), 48 deletions(-)
-- 2.35.1
| |