lkml.org 
[lkml]   [2022]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: davinci: fix typos in comments
Date
Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

---
arch/arm/mach-davinci/board-dm355-evm.c | 4 ++--
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/devices.c | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 3c5a9e3c128a..36983dd73904 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -222,7 +222,7 @@ static struct v4l2_input tvp5146_inputs[] = {

/*
* this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
+ * output that goes to vpfe. There is a one to one correspondence
* with tvp5146_inputs
*/
static struct vpfe_route tvp5146_routes[] = {
@@ -295,7 +295,7 @@ static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)

/*
- * The outputs available from VPBE + ecnoders. Keep the
+ * The outputs available from VPBE + encoders. Keep the
* the order same as that of encoders. First those from venc followed by that
* from encoders. Index in the output refers to index on a particular encoder.
* Driver uses this index to pass it to encoder when it supports more than
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index b3bef74c982a..21cf356fcd01 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -535,7 +535,7 @@ static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)

/*
- * The outputs available from VPBE + ecnoders. Keep the
+ * The outputs available from VPBE + encoders. Keep the
* the order same as that of encoders. First those from venc followed by that
* from encoders. Index in the output refers to index on a particular
* encoder.Driver uses this index to pass it to encoder when it supports more
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index cce3a621eb20..1493f4a77e29 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -260,7 +260,7 @@ static struct v4l2_input dm644xevm_tvp5146_inputs[] = {

/*
* this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
+ * output that goes to vpfe. There is a one to one correspondence
* with tvp5146_inputs
*/
static struct vpfe_route dm644xevm_tvp5146_routes[] = {
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 849e811fade7..781a619af1e1 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -245,7 +245,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
/* Power-on 3.3V IO cells */
__raw_writel(0,
DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
- /*Set up the pull regiter for MMC */
+ /*Set up the pull register for MMC */
davinci_cfg_reg(DM644X_MSTK);
}

\
 
 \ /
  Last update: 2022-03-18 11:40    [W:0.038 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site