lkml.org 
[lkml]   [2022]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: davinci: fix typos in comments
On Fri, Mar 18, 2022 at 11:37 AM Julia Lawall <Julia.Lawall@inria.fr> wrote:
>
> Various spelling mistakes in comments.
> Detected with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
>
> ---
> arch/arm/mach-davinci/board-dm355-evm.c | 4 ++--
> arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
> arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
> arch/arm/mach-davinci/devices.c | 2 +-
> 4 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
> index 3c5a9e3c128a..36983dd73904 100644
> --- a/arch/arm/mach-davinci/board-dm355-evm.c
> +++ b/arch/arm/mach-davinci/board-dm355-evm.c
> @@ -222,7 +222,7 @@ static struct v4l2_input tvp5146_inputs[] = {
>
> /*
> * this is the route info for connecting each input to decoder
> - * ouput that goes to vpfe. There is a one to one correspondence
> + * output that goes to vpfe. There is a one to one correspondence
> * with tvp5146_inputs
> */
> static struct vpfe_route tvp5146_routes[] = {
> @@ -295,7 +295,7 @@ static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
> #define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
>
> /*
> - * The outputs available from VPBE + ecnoders. Keep the
> + * The outputs available from VPBE + encoders. Keep the
> * the order same as that of encoders. First those from venc followed by that
> * from encoders. Index in the output refers to index on a particular encoder.
> * Driver uses this index to pass it to encoder when it supports more than
> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
> index b3bef74c982a..21cf356fcd01 100644
> --- a/arch/arm/mach-davinci/board-dm365-evm.c
> +++ b/arch/arm/mach-davinci/board-dm365-evm.c
> @@ -535,7 +535,7 @@ static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
> #define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
>
> /*
> - * The outputs available from VPBE + ecnoders. Keep the
> + * The outputs available from VPBE + encoders. Keep the
> * the order same as that of encoders. First those from venc followed by that
> * from encoders. Index in the output refers to index on a particular
> * encoder.Driver uses this index to pass it to encoder when it supports more
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index cce3a621eb20..1493f4a77e29 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -260,7 +260,7 @@ static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
>
> /*
> * this is the route info for connecting each input to decoder
> - * ouput that goes to vpfe. There is a one to one correspondence
> + * output that goes to vpfe. There is a one to one correspondence
> * with tvp5146_inputs
> */
> static struct vpfe_route dm644xevm_tvp5146_routes[] = {
> diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
> index 849e811fade7..781a619af1e1 100644
> --- a/arch/arm/mach-davinci/devices.c
> +++ b/arch/arm/mach-davinci/devices.c
> @@ -245,7 +245,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
> /* Power-on 3.3V IO cells */
> __raw_writel(0,
> DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
> - /*Set up the pull regiter for MMC */
> + /*Set up the pull register for MMC */

While at it you could add a missic space.

With that:

Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>

> davinci_cfg_reg(DM644X_MSTK);
> }
>
>

\
 
 \ /
  Last update: 2022-03-18 12:35    [W:0.036 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site