lkml.org 
[lkml]   [2022]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/10] arch: arm: mach-hpe: Introduce the HPE GXP architecture
Date
From: Nick Hawkins <nick.hawkins@hpe.com>

The GXP is the HPE BMC SoC that is used in the majority
of HPE Generation 10 servers. Traditionally the asic will
last multiple generations of server before being replaced.
In gxp.c we reset the EHCI controller early to boot the asic.

Info about SoC:

HPE GXP is the name of the HPE Soc. This SoC is used to implement
many BMC features at HPE. It supports ARMv7 architecture based on
the Cortex A9 core. It is capable of using an AXI bus to which
a memory controller is attached. It has multiple SPI interfaces
to connect boot flash and BIOS flash. It uses a 10/100/1000 MAC
for network connectivity. It has multiple i2c engines to drive
connectivity with a host infrastructure. The initial patches
enable the watchdog and timer enabling the host to be able to
boot.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
---
arch/arm/Kconfig | 2 ++
arch/arm/Makefile | 1 +
arch/arm/mach-hpe/Kconfig | 20 +++++++++++++
arch/arm/mach-hpe/Makefile | 1 +
arch/arm/mach-hpe/gxp.c | 61 ++++++++++++++++++++++++++++++++++++++
5 files changed, 85 insertions(+)
create mode 100644 arch/arm/mach-hpe/Kconfig
create mode 100644 arch/arm/mach-hpe/Makefile
create mode 100644 arch/arm/mach-hpe/gxp.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c97cb40eebb..6998b5b5f59e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -618,6 +618,8 @@ source "arch/arm/mach-highbank/Kconfig"

source "arch/arm/mach-hisi/Kconfig"

+source "arch/arm/mach-hpe/Kconfig"
+
source "arch/arm/mach-imx/Kconfig"

source "arch/arm/mach-integrator/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77172d555c7e..1cc0523d0a0a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -178,6 +178,7 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_HISI) += hisi
+machine-$(CONFIG_ARCH_HPE) += hpe
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
new file mode 100644
index 000000000000..9b27f97c6536
--- /dev/null
+++ b/arch/arm/mach-hpe/Kconfig
@@ -0,0 +1,20 @@
+menuconfig ARCH_HPE
+ bool "HPE SoC support"
+ help
+ This enables support for HPE ARM based SoC chips
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+ bool "HPE GXP SoC"
+ select ARM_VIC
+ select PINCTRL
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select CLKSRC_MMIO
+ depends on ARCH_MULTI_V7
+ help
+ Support for GXP SoCs
+
+endif
diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
new file mode 100644
index 000000000000..8b0a91234df4
--- /dev/null
+++ b/arch/arm/mach-hpe/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
new file mode 100644
index 000000000000..44f6d719a346
--- /dev/null
+++ b/arch/arm/mach-hpe/gxp.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P.*/
+
+
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#define IOP_REGS_PHYS_BASE 0xc0000000
+#define IOP_REGS_VIRT_BASE 0xf0000000
+#define IOP_REGS_SIZE (240*SZ_1M)
+#define RESET_CMD 0x00080002
+
+static struct map_desc gxp_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)IOP_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(IOP_REGS_PHYS_BASE),
+ .length = IOP_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init gxp_map_io(void)
+{
+ iotable_init(gxp_io_desc, ARRAY_SIZE(gxp_io_desc));
+}
+
+static void __init gxp_dt_init(void)
+{
+ void __iomem *gxp_init_regs;
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "hpe,gxp-cpu-init");
+ gxp_init_regs = of_iomap(np, 0);
+
+ /*it is necessary for our SOC to reset ECHI through this*/
+ /* register due to a hardware limitation*/
+ __raw_writel(RESET_CMD,
+ (gxp_init_regs));
+
+}
+
+static void gxp_restart(enum reboot_mode mode, const char *cmd)
+{
+ __raw_writel(1, (void __iomem *) IOP_REGS_VIRT_BASE);
+}
+
+static const char * const gxp_board_dt_compat[] = {
+ "hpe,gxp",
+ NULL,
+};
+
+DT_MACHINE_START(GXP_DT, "HPE GXP")
+ .init_machine = gxp_dt_init,
+ .map_io = gxp_map_io,
+ .restart = gxp_restart,
+ .dt_compat = gxp_board_dt_compat,
+MACHINE_END
--
2.17.1
\
 
 \ /
  Last update: 2022-03-10 20:53    [W:0.218 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site