lkml.org 
[lkml]   [2022]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 15/16] selftests: arm64: Add initial SCMI testcases
Date
A few initial testcases for Clock and Sensot protocol plus all the test
infrastructure, including the test runeer.

All of this just an experimental demonstrator.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
tools/testing/selftests/arm64/Makefile | 2 +-
tools/testing/selftests/arm64/scmi/Makefile | 6 +
tools/testing/selftests/arm64/scmi/config | 1 +
.../arm64/scmi/kselftest_scmi_lib.sh | 118 ++++++++++++++++++
.../selftests/arm64/scmi/run_scmi_tests.sh | 69 ++++++++++
.../testcases/protocol_0x14/clock_enable.sh | 33 +++++
.../protocol_0x14/clock_rate_read.sh | 18 +++
.../protocol_0x14/clock_rate_write.sh | 29 +++++
.../testcases/protocol_0x15/sensor_reading.sh | 17 +++
9 files changed, 292 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/arm64/scmi/Makefile
create mode 100644 tools/testing/selftests/arm64/scmi/config
create mode 100644 tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh
create mode 100755 tools/testing/selftests/arm64/scmi/run_scmi_tests.sh
create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh
create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh
create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh
create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh

diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile
index 1e8d9a8f59df..6648dd8e2173 100644
--- a/tools/testing/selftests/arm64/Makefile
+++ b/tools/testing/selftests/arm64/Makefile
@@ -4,7 +4,7 @@
ARCH ?= $(shell uname -m 2>/dev/null || echo not)

ifneq (,$(filter $(ARCH),aarch64 arm64))
-ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi
+ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi scmi
else
ARM64_SUBTARGETS :=
endif
diff --git a/tools/testing/selftests/arm64/scmi/Makefile b/tools/testing/selftests/arm64/scmi/Makefile
new file mode 100644
index 000000000000..8786d8d4c332
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+
+TEST_PROGS := run_scmi_tests.sh
+TEST_FILES := kselftest_scmi_lib.sh testcases/*
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/arm64/scmi/config b/tools/testing/selftests/arm64/scmi/config
new file mode 100644
index 000000000000..161387084a3f
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/config
@@ -0,0 +1 @@
+CONFIG_ARM_SCMI_TEST_DRIVER=y
diff --git a/tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh b/tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh
new file mode 100644
index 000000000000..54d27b5f3e1a
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh
@@ -0,0 +1,118 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+SCMI_TEST_DRV="scmi_test_driver"
+TRES=(0 0 0)
+
+ksft_log()
+{
+ echo -e "[SCMI]: $1"
+}
+
+ksft_skip()
+{
+ echo -e "[SKIP]: $1"
+ exit 4
+}
+
+ksft_pass()
+{
+ echo -e "[PASS]: $1"
+}
+
+ksft_fail()
+{
+ echo -e "[FAIL]: $1"
+ exit 1
+}
+
+ksft_results()
+{
+ if [ $# -gt 0 ]; then
+ local val
+ local idx
+ local ret=$1
+
+ case "$ret" in
+ 0)
+ idx=0
+ ;;
+ 4)
+ idx=1
+ ;;
+ *)
+ idx=2
+ ;;
+ esac
+ val=${TRES[${idx}]}
+ TRES[$idx]=$((val + 1))
+ else
+ ksft_log "Summary - PASS[${TRES[0]}] SKIP[${TRES[1]}] FAIL[${TRES[2]}]"
+ [ "x${TRES[2]}" != "x0" ] && exit 1
+ [ "x${TRES[1]}" != "x0" -a "x${TRES[0]}" == "x0" ] && exit 4
+ exit 0
+ fi
+}
+
+ksft_scmi_run_one()
+{
+ tcase=$1
+
+ echo "-> Running testcase: $tcase"
+
+ ./$tcase
+ ret=$?
+
+ ksft_results $ret
+}
+
+ksft_scmi_check_fw_version()
+{
+ local supported=$1
+ local current="${SCMI_VENDOR}:${SCMI_SUB_VENDOR}"
+
+ if [ "x${current}" != "x${supported}" ]; then
+ ksft_skip "Current FW('$current') is UNSUPPORTED. Should be '$supported'"
+ fi
+}
+
+ksft_scmi_transport_is_atomic ()
+{
+ [ "x$SCMI_TRANSPORT_IS_ATOMIC" == "xY" ] && return 0 || return 1
+}
+
+ksft_scmi_protocol_resources_get()
+{
+ local proto_dir=$1
+ local resources=""
+
+ for d in ${proto_dir}/*; do
+ rd="$(basename $d)"
+ [[ $rd =~ [0-9] ]] && resources="$resources $rd"
+ done
+
+ echo "$resources"
+}
+
+ksft_scmi_value_get()
+{
+ local syspath=$1
+ local __retval=$2
+ local value
+
+ value=$(cat $syspath)
+ [ "x$?" != "x0" ] && ksft_fail "Fail to read $syspath"
+
+ eval $__retval="'$value'"
+}
+
+ksft_scmi_value_set()
+{
+ local syspath=$1
+ local value=$2
+
+ echo $value > $syspath
+ [ "x$?" != "x0" ] && ksft_fail "Fail to write $syspath - err:$?"
+}
+
+
diff --git a/tools/testing/selftests/arm64/scmi/run_scmi_tests.sh b/tools/testing/selftests/arm64/scmi/run_scmi_tests.sh
new file mode 100755
index 000000000000..f372744a4579
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/run_scmi_tests.sh
@@ -0,0 +1,69 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. ./kselftest_scmi_lib.sh
+
+check_root_privs()
+{
+ [ x"$(id -u)" != "x0" ] && ksft_skip "You need to be root"
+}
+
+check_scmi_testing_stack()
+{
+ local debugfs_root=$(findmnt -o TARGET -t debugfs | grep -v TARGET)
+ export SCMI_DEBUGFS_TOPDIR="$debugfs_root/scmi"
+
+ # Try to load module if not builtin
+ if [ ! -d $SCMI_DEBUGFS_TOPDIR ]; then
+ modprobe $SCMI_TEST_DRV || ksft_skip "Failed to load $SCMI_TEST_DRV"
+ [ ! -d $SCMI_DEBUGFS_TOPDIR ] && ksft_skip "SCMI Test stack not found; is CONFIG_ARM_SCMI_TEST_DRIVER enabled ?"
+ fi
+}
+
+setup_scmi_test_env()
+{
+ local scmi_info_dir="${SCMI_DEBUGFS_TOPDIR}/info/"
+
+ export SCMI_VENDOR="$(cat ${scmi_info_dir}/vendor_id)"
+ export SCMI_SUB_VENDOR="$(cat ${scmi_info_dir}/sub_vendor_id)"
+ export SCMI_VERS_MAJ="$(cat ${scmi_info_dir}/major_ver)"
+ export SCMI_VERS_MIN="$(cat ${scmi_info_dir}/minor_ver)"
+ export SCMI_VERS_IMPL="$(cat ${scmi_info_dir}/impl_ver)"
+
+ ksft_log "Found stack: $SCMI_VENDOR/$SCMI_SUB_VENDOR ${SCMI_VERS_MAJ}.${SCMI_VERS_MAJ} - $SCMI_VERS_IMPL"
+
+ SCMI_TEST_PROTOS=""
+ for p in ${SCMI_DEBUGFS_TOPDIR}/protocol_*; do
+ SCMI_TEST_PROTOS="${SCMI_TEST_PROTOS} $(basename $p)"
+ done
+
+ ksft_log "Found testing protocols: $SCMI_TEST_PROTOS"
+
+ export SCMI_TEST_PROTOS
+ SCMI_TRANSPORT_IS_ATOMIC="N"
+ [ -d "${SCMI_DEBUGFS_TOPDIR}/transport" ] &&
+ SCMI_TRANSPORT_IS_ATOMIC=$(cat "${SCMI_DEBUGFS_TOPDIR}/transport/is_atomic")
+ export SCMI_TRANSPORT_IS_ATOMIC
+}
+
+# Setup
+check_root_privs
+
+check_scmi_testing_stack
+
+setup_scmi_test_env
+
+# Main
+# Run all available tests for the found protocols
+#
+for proto_dir in $SCMI_TEST_PROTOS; do
+ [ ! -d $proto_dir ] && ksft_log "$proto_dir tests NOT supported." && continue
+ export TST_PROTO_DIR="${SCMI_DEBUGFS_TOPDIR}/${proto_dir}"
+ TST_PROTO_VERSION=$(cat ${TST_PROTO_DIR}/version)
+ ksft_log "Running tests for SCMI $proto_dir ver:$TST_PROTO_VERSION"
+ for tst in $proto_dir/*; do
+ ksft_scmi_run_one $tst
+ done
+done
+
+ksft_results
diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh
new file mode 100755
index 000000000000..4cdf3a097ba7
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. ./kselftest_scmi_lib.sh
+
+supported_fw="EMU-SCMI-VM:userland"
+ksft_scmi_check_fw_version $supported_fw
+
+clock_enable_disable() {
+ rname=$1
+ rdir=$2
+ clk_op=$3
+
+ ksft_scmi_value_set $rdir/$clk_op Y
+ ksft_scmi_value_set $rdir/$clk_op N
+ ksft_log "Clock $rname: $clk_op - ON/OFF ... OK"
+}
+
+resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
+ksft_log "Found Clock resources: $resources"
+
+for res in $resources;do
+ resd="$TST_PROTO_DIR/$res"
+ name="$(cat $resd/info/name)"
+
+ clock_enable_disable $name $resd "enable"
+ if [ ksft_transport_is_atomic ]; then
+ clock_enable_disable $name $resd "enable_atomic_irqs_off"
+ clock_enable_disable $name $resd "enable_atomic_irqs_on"
+ fi
+done
+
+ksft_pass "$0"
diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh
new file mode 100755
index 000000000000..88c444fd317d
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. ./kselftest_scmi_lib.sh
+
+resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
+ksft_log "Found Clock resources: $resources"
+
+for res in $resources;do
+ resd="$TST_PROTO_DIR/$res"
+ name="$(cat $resd/info/name)"
+ val=0
+
+ ksft_scmi_value_get $resd/rate_get_set val
+ ksft_log "$name READ => $val"
+done
+
+ksft_pass "$0"
diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh
new file mode 100755
index 000000000000..346084ec3812
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh
@@ -0,0 +1,29 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. ./kselftest_scmi_lib.sh
+
+supported_fw="EMU-SCMI-VM:userland"
+ksft_scmi_check_fw_version $supported_fw
+
+resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
+ksft_log "Found Clock resources: $resources"
+
+for res in $resources;do
+ resd="$TST_PROTO_DIR/$res"
+ name="$(cat $resd/info/name)"
+ val=0
+ oldval=0
+ setval=0
+
+ ksft_scmi_value_get $resd/rate_get_set oldval
+ setval=$((oldval + 666))
+
+ ksft_scmi_value_set $resd/rate_get_set $setval
+
+ ksft_scmi_value_get $resd/rate_get_set val
+ [ "x$val" != "x$setval" ] && ksft_fail "Set:$setval readback:$val"
+ ksft_log "$name OK -> read:$oldval set:$setval readback:$val"
+done
+
+ksft_pass "$0"
diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh
new file mode 100755
index 000000000000..b0f5f6361379
--- /dev/null
+++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+
+. ./kselftest_scmi_lib.sh
+
+resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
+ksft_log "Found Sensor resources: $resources"
+
+for res in $resources;do
+ resd="$TST_PROTO_DIR/$res"
+ name="$(cat $resd/info/name)"
+ val=0
+
+ ksft_scmi_value_get $resd/reading_get val
+ ksft_log "$name READ => $val"
+done
+
+ksft_pass $0
--
2.17.1
\
 
 \ /
  Last update: 2022-02-27 21:57    [W:0.128 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site