lkml.org 
[lkml]   [2022]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 09/16] firmware: arm_scmi: testing: Add Clock protocol full support
Date
Add SCMI Clock protocol testing support exposing SCMI Clock protocol
operations under debugfs /sys/kernel/debug/scmi/protocol_0x14/<XXX>/, where
the subdirectories <XXX> represents each a distinct clock resource with
ID equal <XXX>.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
Documentation/ABI/testing/debugfs-scmi | 56 +++++++
.../arm_scmi/scmi_test_driver/test_clocks.c | 150 +++++++++++++++++-
.../arm_scmi/scmi_test_driver/test_common.c | 48 ++++++
.../arm_scmi/scmi_test_driver/test_common.h | 1 +
4 files changed, 254 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/debugfs-scmi b/Documentation/ABI/testing/debugfs-scmi
index 85177f3723c8..e91c19e7a323 100644
--- a/Documentation/ABI/testing/debugfs-scmi
+++ b/Documentation/ABI/testing/debugfs-scmi
@@ -99,3 +99,59 @@ Description: SCMI Clock Protocol informational RO data for clock resource
named field of struct scmi_clock_info as documented in
include/scmi/protocol.h
Users: KSelftest, Debugging
+
+What: /sys/kernel/debug/scmi/protocol_0x14/<XXX>/rate_get_set
+Date: Feb 2022
+KernelVersion: 5.19
+Contact: cristian.marussi@arm.com
+Description: SCMI Clock Protocol rate get/set operation for clock resource
+ with id <XXX>; a read returns the currently set clock rate value
+ as a base-10 integer while the write of a base-10 integer sets a
+ new clock rate value.
+ Each R/W access invokes the corresponding SCMI Clock protocol
+ operations and issuing of needed SCMI commands.
+Users: KSelftest, Debugging
+
+What: /sys/kernel/debug/scmi/protocol_0x14/<XXX>/enable
+Date: Feb 2022
+KernelVersion: 5.19
+Contact: cristian.marussi@arm.com
+Description: SCMI Clock Protocol enable operation for clock resource with id
+ <XXX>; writing a boolean value causes that specific clock to be
+ enabled or disabled.
+ No reference counting is kept: each write access invokes the
+ corresponding SCMI Clock protocol operations and issuing of
+ needed SCMI commands.
+Users: KSelftest, Debugging
+
+What: /sys/kernel/debug/scmi/protocol_0x14/<XXX>/enable_atomic_irqs_on
+Date: Feb 2022
+KernelVersion: 5.19
+Contact: cristian.marussi@arm.com
+Description: SCMI Clock Protocol enable atomic operation for clock resource
+ with id <XXX>; writing a boolean value causes that specific
+ clock to be enabled or disabled using SCMI transport in polling
+ mode, if allowed by the underlying SCMI transport.
+ No reference counting is kept: each write access invokes the
+ corresponding SCMI Clock protocol operations and issuing of
+ needed SCMI commands.
+ Available only if the underlying SCMI transport is atomic
+ capable (/sys/kernel/debug/scmi/transport/is_atomic is True).
+Users: KSelftest, Debugging
+
+What: /sys/kernel/debug/scmi/protocol_0x14/<XXX>/enable_atomic_irqs_off
+Date: Feb 2022
+KernelVersion: 5.19
+Contact: cristian.marussi@arm.com
+Description: SCMI Clock Protocol enable atomic operation for clock resource
+ with id <XXX>; writing a boolean value causes that specific
+ clock to be enabled or disabled using SCMI transport in polling
+ mode, if allowed by the underlying SCMI transport.
+ Local IRQs are disabled while the SCMI command transaction is
+ executed.
+ No reference counting is kept: each write access invokes the
+ corresponding SCMI Clock protocol operations and issuing of
+ needed SCMI commands.
+ Available only if the underlying SCMI transport is atomic
+ capable (/sys/kernel/debug/scmi/transport/is_atomic is True).
+Users: KSelftest, Debugging
diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/test_clocks.c b/drivers/firmware/arm_scmi/scmi_test_driver/test_clocks.c
index 3b9e92baa509..ae5b1af88f60 100644
--- a/drivers/firmware/arm_scmi/scmi_test_driver/test_clocks.c
+++ b/drivers/firmware/arm_scmi/scmi_test_driver/test_clocks.c
@@ -24,6 +24,139 @@ struct scmi_clock_data {
const struct scmi_clock_info **clk_info;
};

+static ssize_t scmi_test_clk_rate_get_read(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ struct scmi_test_buffer *data = filp->private_data;
+
+ if (!data)
+ return 0;
+
+ if (!data->used) {
+ u64 rate;
+ struct scmi_test_setup *tsp = filp->f_inode->i_private;
+ const struct scmi_clk_proto_ops *clock_ops = tsp->ops;
+
+ ret = clock_ops->rate_get(tsp->ph, data->id, &rate);
+ if (ret)
+ return ret;
+
+ data->used = scnprintf(data->buf, data->len, "%lld\n", rate);
+ }
+
+ return simple_read_from_buffer(buf, count, ppos, data->buf, data->used);
+}
+
+static ssize_t scmi_test_clk_rate_get_write(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ u64 rate;
+ struct scmi_test_setup *tsp = filp->f_inode->i_private;
+ const struct scmi_clk_proto_ops *clock_ops = tsp->ops;
+ struct scmi_test_buffer *data = filp->private_data;
+
+ if (!data)
+ return 0;
+
+ ret = kstrtou64_from_user(buf, count, 10, &rate);
+ if (ret < 0)
+ return ret;
+
+ ret = clock_ops->rate_set(tsp->ph, data->id, rate);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static const struct file_operations test_clk_rate_get_set_fops = {
+ .open = scmi_test_setup_open,
+ .release = scmi_test_release,
+ .read = scmi_test_clk_rate_get_read,
+ .write = scmi_test_clk_rate_get_write,
+};
+
+static ssize_t scmi_test_clk_enable_write(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ bool enabled, irqs_off;
+ int ret;
+ unsigned long flags;
+ struct scmi_test_setup *tsp = filp->f_inode->i_private;
+ const struct scmi_clk_proto_ops *clock_ops = tsp->ops;
+ struct scmi_test_buffer *data = filp->private_data;
+
+ if (!data)
+ return 0;
+
+ ret = kstrtobool_from_user(buf, count, &enabled);
+ if (ret)
+ return ret;
+
+ irqs_off = !strncmp(filp->f_path.dentry->d_name.name,
+ "enable_atomic_irqs_off",
+ strlen("enable_atomic_irqs_off"));
+ if (irqs_off)
+ local_irq_save(flags);
+
+ if (enabled)
+ ret = clock_ops->enable_atomic(tsp->ph, data->id);
+ else
+ ret = clock_ops->disable_atomic(tsp->ph, data->id);
+
+ if (irqs_off)
+ local_irq_restore(flags);
+
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static const struct file_operations test_clk_enable_fops = {
+ .open = scmi_test_setup_open,
+ .release = scmi_test_release,
+ .write = scmi_test_clk_enable_write,
+};
+
+static ssize_t scmi_test_clk_prepare_enable_write(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ bool enabled;
+ int ret;
+ struct scmi_test_setup *tsp = filp->f_inode->i_private;
+ const struct scmi_clk_proto_ops *clock_ops = tsp->ops;
+ struct scmi_test_buffer *data = filp->private_data;
+
+ if (!data)
+ return 0;
+
+ ret = kstrtobool_from_user(buf, count, &enabled);
+ if (ret)
+ return ret;
+
+ if (enabled)
+ ret = clock_ops->enable(tsp->ph, data->id);
+ else
+ ret = clock_ops->disable(tsp->ph, data->id);
+
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static const struct file_operations test_clk_prepare_enable_fops = {
+ .open = scmi_test_setup_open,
+ .release = scmi_test_release,
+ .write = scmi_test_clk_prepare_enable_write,
+};
+
static ssize_t scmi_test_clock_rates_read(struct file *filp, char __user *buf,
size_t count, loff_t *ppos)
{
@@ -130,9 +263,24 @@ int scmi_test_clock_init(struct scmi_test_setup *tsp)

snprintf(clock_dir, 16, "%03d", i);
clock_dentry = debugfs_create_dir(clock_dir, tsp->parent);
- if (!IS_ERR(clock_dentry))
+ if (!IS_ERR(clock_dentry)) {
scmi_test_debugfs_clock_info_create(cdata->clk_info[i],
clock_dentry);
+ debugfs_create_file("rate_get_set", 0600,
+ clock_dentry, tsp,
+ &test_clk_rate_get_set_fops);
+ if (tsp->sdev->handle->transport->is_atomic) {
+ debugfs_create_file("enable_atomic_irqs_off",
+ 0200, clock_dentry, tsp,
+ &test_clk_enable_fops);
+ debugfs_create_file("enable_atomic_irqs_on",
+ 0200, clock_dentry, tsp,
+ &test_clk_enable_fops);
+ }
+ debugfs_create_file("enable", 0200,
+ clock_dentry, tsp,
+ &test_clk_prepare_enable_fops);
+ }
}

return 0;
diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.c b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.c
index 1a4b6aa35095..cbe2eec4f2ac 100644
--- a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.c
+++ b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.c
@@ -15,6 +15,54 @@
#include "test_common.h"

/* Common File operations */
+
+/**
+ * scmi_test_setup_open - A common open helper
+ * @ino: Related inode reference
+ * @filp: Related file pointer reference
+ *
+ * Expects to receive a struct scmi_test_setup via inode i_private reference and
+ * then allocate a properly sized buffer; it also tries to parse the parent
+ * directory name in search for a base10 integer and, if found, stores it into
+ * the buffer descriptor @id field: this comes handy since most of the SCMI
+ * protocol operations and data are bound to some specific SCMI resource id and
+ * the SCMI debugfs directory tree is structured to mirror this layout, so that,
+ * as an example, protocol <NN> would expose <operation_AAA> about its resource
+ * with id <XXX> as:
+ *
+ * /sys/kernel/debug/scmi/protocol_0x<NN>/<XXX>/<operation_AAA>
+ *
+ * As as result this open would allocate a data buffer, parse the dentry and
+ * set data->id = <XXX>
+ *
+ * Return: 0 on Success
+ */
+int scmi_test_setup_open(struct inode *ino, struct file *filp)
+{
+ unsigned int id;
+ size_t blen;
+ struct scmi_test_buffer *data;
+ struct scmi_test_setup *tsp = filp->f_inode->i_private;
+ const char *id_str = filp->f_path.dentry->d_parent->d_name.name;
+
+ if (!tsp)
+ return -EINVAL;
+
+ blen = tsp->blen ?: SCMI_TEST_DEFAULT_BUF_SZ;
+ data = kzalloc(sizeof(*data) + blen, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->len = blen;
+ /* Grab clk ID from debugfs entry naming if any */
+ if (!kstrtouint(id_str, 10, &id))
+ data->id = id;
+
+ filp->private_data = data;
+
+ return 0;
+}
+
int scmi_test_release(struct inode *ino, struct file *filp)
{
kfree(filp->private_data);
diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
index 1ff5bbc32ae3..3c64cae9fae9 100644
--- a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
+++ b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
@@ -68,6 +68,7 @@ struct scmi_test_buffer {

extern const struct file_operations scmi_test_string_file_fops;

+int scmi_test_setup_open(struct inode *ino, struct file *filp);
int scmi_test_fixed_buffer_open(struct inode *ino, struct file *filp);
int scmi_test_release(struct inode *ino, struct file *filp);

--
2.17.1
\
 
 \ /
  Last update: 2022-02-27 21:57    [W:0.139 / U:2.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site