lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 0/4] spi-mem: Allow specifying the byte order in DTR mode
Date
On 2/21/22 09:44, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Am 2022-02-18 15:58, schrieb Tudor Ambarus:
>> Fortunately there are controllers
>> that can swap back the bytes at runtime, fixing the endiannesses.
>> Provide
>> a way for the upper layers to specify the byte order in DTR mode.
>
> Are there any patches for the atmel-quadspi yet? What happens if

not public, but will publish them these days.

> the controller doesn't support it? Will there be a software fallback?

no need for a fallback, the controller can ignore op->data.dtr_bswap16 if
it can't swap bytes.

Here's the changes that enable this on atmel-quadspi:

Author: Tudor Ambarus <tudor.ambarus@microchip.com>
Date: Thu Feb 17 10:48:10 2022 +0200

spi: atmel-quadspi: Set endianness on 8D-8D-8D mode according to the flash requirements

Macronix swaps bytes on a 16-bit boundary when configured in Octal DTR.
The byte order of 16-bit words is swapped when read or write written in
8D-8D-8D mode compared to STR modes. Set the endianness flash requirements
to avoid endianness problems during boot stages.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index a4ba94ce84f1..c4a3963f7c84 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -697,6 +697,8 @@ static int atmel_qspi_sama7g5_set_cfg(struct atmel_qspi *aq,
ifr |= QSPI_IFR_DDREN;
if (op->cmd.dtr)
ifr |= QSPI_IFR_DDRCMDEN;
+ if (op->data.dtr_bswap16)
+ ifr |= QSPI_IFR_END;

ifr |= QSPI_IFR_DQSEN;
}



\
 
 \ /
  Last update: 2022-02-22 14:56    [W:0.241 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site