lkml.org 
[lkml]   [2022]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 11/23] phy: qcom-qmp-ufs : Add HS G4 mode support to SM8450 SoC


On 1 December 2022 20:43:16 GMT+03:00, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
>UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
>sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
>reusing the G4 init sequence of SM8350.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>---
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>index 75e55c4181c9..96e03d4249da 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>@@ -935,6 +935,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> .serdes = sm8350_ufsphy_hs_b_serdes,
> .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> },
>+ .tbls_hs_g4 = {
>+ .tx = sm8350_ufsphy_g4_tx,
>+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx),
>+ .rx = sm8350_ufsphy_g4_rx,
>+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx),
>+ .pcs = sm8350_ufsphy_g4_pcs,
>+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
>+ },
> .clk_list = sm8450_ufs_phy_clk_l,
> .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> .vreg_list = qmp_phy_vreg_l,

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-12-05 22:56    [W:0.184 / U:3.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site