lkml.org 
[lkml]   [2022]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 11/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC
Date
UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 75e55c4181c9..96e03d4249da 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -935,6 +935,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
.serdes = sm8350_ufsphy_hs_b_serdes,
.serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
},
+ .tbls_hs_g4 = {
+ .tx = sm8350_ufsphy_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+ .rx = sm8350_ufsphy_g4_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+ .pcs = sm8350_ufsphy_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+ },
.clk_list = sm8450_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
--
2.25.1
\
 
 \ /
  Last update: 2022-12-01 18:47    [W:0.236 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site