lkml.org 
[lkml]   [2022]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 05/17] dt-bindings: arm: msm: Fix register regions used for LLCC banks
Date
Register regions of the LLCC banks are located at different addresses.
Currently, the binding just lists the LLCC0 base address and tries to
cover all the banks using a single size. This is entirely wrong as there
are other register regions that happen to lie inside the size covered by
the binding such as the memory controller and holes.

So this needs to be fixed by specifying the base address of individual
LLCC banks. This approach will break the existing users of this binding
as the register regions are split and the drivers now cannot use
LLCC0 register region for accessing rest of the banks (which is wrong
anyway).

But considering the fact that the binding was wrong from the day one and
also the device drivers going wrong by the binding, this breakage is
acceptable.

Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../bindings/arm/msm/qcom,llcc.yaml | 125 ++++++++++++++++--
1 file changed, 114 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
index d1df49ffcc1b..050e21d4a03e 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
@@ -33,14 +33,12 @@ properties:
- qcom,sm8550-llcc

reg:
- items:
- - description: LLCC base register region
- - description: LLCC broadcast base register region
+ minItems: 2
+ maxItems: 9

reg-names:
- items:
- - const: llcc_base
- - const: llcc_broadcast_base
+ minItems: 2
+ maxItems: 9

interrupts:
maxItems: 1
@@ -50,15 +48,120 @@ required:
- reg
- reg-names

+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7180-llcc
+ - qcom,sm6350-llcc
+ then:
+ properties:
+ reg:
+ items:
+ - description: LLCC0 base register region
+ - description: LLCC broadcast base register region
+ reg-names:
+ items:
+ - const: llcc0_base
+ - const: llcc_broadcast_base
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-llcc
+ then:
+ properties:
+ reg:
+ items:
+ - description: LLCC0 base register region
+ - description: LLCC1 base register region
+ - description: LLCC broadcast base register region
+ reg-names:
+ items:
+ - const: llcc0_base
+ - const: llcc1_base
+ - const: llcc_broadcast_base
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8180x-llcc
+ - qcom,sc8280xp-llcc
+ then:
+ properties:
+ reg:
+ items:
+ - description: LLCC0 base register region
+ - description: LLCC1 base register region
+ - description: LLCC2 base register region
+ - description: LLCC3 base register region
+ - description: LLCC4 base register region
+ - description: LLCC5 base register region
+ - description: LLCC6 base register region
+ - description: LLCC7 base register region
+ - description: LLCC broadcast base register region
+ reg-names:
+ items:
+ - const: llcc0_base
+ - const: llcc1_base
+ - const: llcc2_base
+ - const: llcc3_base
+ - const: llcc4_base
+ - const: llcc5_base
+ - const: llcc6_base
+ - const: llcc7_base
+ - const: llcc_broadcast_base
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm845-llcc
+ - qcom,sm8150-llcc
+ - qcom,sm8250-llcc
+ - qcom,sm8350-llcc
+ - qcom,sm8450-llcc
+ then:
+ properties:
+ reg:
+ items:
+ - description: LLCC0 base register region
+ - description: LLCC1 base register region
+ - description: LLCC2 base register region
+ - description: LLCC3 base register region
+ - description: LLCC broadcast base register region
+ reg-names:
+ items:
+ - const: llcc0_base
+ - const: llcc1_base
+ - const: llcc2_base
+ - const: llcc3_base
+ - const: llcc_broadcast_base
+
additionalProperties: false

examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

- system-cache-controller@1100000 {
- compatible = "qcom,sdm845-llcc";
- reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
- reg-names = "llcc_base", "llcc_broadcast_base";
- interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ system-cache-controller@1100000 {
+ compatible = "qcom,sdm845-llcc";
+ reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>,
+ <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+ <0 0x01300000 0 0x50000>;
+ reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+ "llcc3_base", "llcc_broadcast_base";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
--
2.25.1
\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.240 / U:3.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site