lkml.org 
[lkml]   [2022]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v5 01/17] EDAC/device: Make use of poll_msec value in edac_device_ctl_info struct
On Wed, Dec 28, 2022 at 02:10:12PM +0530, Manivannan Sadhasivam wrote:
> The EDAC drivers may optionally pass the poll_msec value. Use that value if
> available, else fall back to 1000ms.

Use this version for your next submission pls:

---
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Wed, 28 Dec 2022 14:10:12 +0530
Subject: [PATCH] EDAC/device: Respect any driver-supplied workqueue polling value

The EDAC drivers may optionally pass the poll_msec value. Use that value
if available, else fall back to 1000ms.

[ bp: Touchups. ]

Fixes: e27e3dac6517 ("drivers/edac: add edac_device class")
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Cc: <stable@vger.kernel.org> # 4.9
Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso
---
drivers/edac/edac_device.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 19522c568aa5..a50b7bcfb731 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -34,6 +34,9 @@
static DEFINE_MUTEX(device_ctls_mutex);
static LIST_HEAD(edac_device_list);

+/* Default workqueue processing interval on this instance, in msecs */
+#define DEFAULT_POLL_INTERVAL 1000
+
#ifdef CONFIG_EDAC_DEBUG
static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev)
{
@@ -336,7 +339,7 @@ static void edac_device_workq_function(struct work_struct *work_req)
* whole one second to save timers firing all over the period
* between integral seconds
*/
- if (edac_dev->poll_msec == 1000)
+ if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL)
edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
else
edac_queue_work(&edac_dev->work, edac_dev->delay);
@@ -366,7 +369,7 @@ static void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev,
* timers firing on sub-second basis, while they are happy
* to fire together on the 1 second exactly
*/
- if (edac_dev->poll_msec == 1000)
+ if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL)
edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
else
edac_queue_work(&edac_dev->work, edac_dev->delay);
@@ -398,7 +401,7 @@ void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev,
{
unsigned long jiffs = msecs_to_jiffies(value);

- if (value == 1000)
+ if (value == DEFAULT_POLL_INTERVAL)
jiffs = round_jiffies_relative(value);

edac_dev->poll_msec = value;
@@ -443,11 +446,7 @@ int edac_device_add_device(struct edac_device_ctl_info *edac_dev)
/* This instance is NOW RUNNING */
edac_dev->op_state = OP_RUNNING_POLL;

- /*
- * enable workq processing on this instance,
- * default = 1000 msec
- */
- edac_device_workq_setup(edac_dev, 1000);
+ edac_device_workq_setup(edac_dev, edac_dev->poll_msec ?: DEFAULT_POLL_INTERVAL);
} else {
edac_dev->op_state = OP_RUNNING_INTERRUPT;
}
--
2.35.1
--
Regards/Gruss,
Boris.

https://people.kernel.org/tglx/notes-about-netiquette

\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.142 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site