[lkml]   [2022]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/8] powerpc/85xx: p2020: Create one unified machine description
This patch series unifies all P2020 boards and machine descriptions into
one generic unified P2020 machine description. With this generic machine
description, kernel can boot on any P2020-based board with correct DTS

Tested on CZ.NIC Turris 1.1 board with has Freescale P2020 processor.
Kernel during booting correctly detects P2020 and prints:
[ 0.000000] Using Freescale P2020 machine description

Changes in v2:
* Added patch "p2020: Move i8259 code into own function" (separated from the next one)
* Renamed CONFIG_P2020 to CONFIG_PPC_P2020
* Fixed descriptions

Link to v1:

Pali Rohár (8):
powerpc/85xx: Mark mpc85xx_rdb_pic_init() as static
powerpc/85xx: Mark mpc85xx_ds_pic_init() as static
powerpc/85xx: p2020: Move all P2020 machine descriptions to p2020.c
powerpc/85xx: p2020: Move i8259 code into own function
powerpc/85xx: p2020: Unify .setup_arch and .init_IRQ callbacks
powerpc/85xx: p2020: Define just one machine description
powerpc/85xx: p2020: Enable boards by new config option
powerpc: dts: turris1x.dts: Remove "fsl,P2020RDB-PC" compatible string

arch/powerpc/boot/dts/turris1x.dts | 2 +-
arch/powerpc/platforms/85xx/Kconfig | 22 ++-
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/mpc85xx_ds.c | 25 +--
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 46 +-----
arch/powerpc/platforms/85xx/p2020.c | 193 ++++++++++++++++++++++
6 files changed, 215 insertions(+), 74 deletions(-)
create mode 100644 arch/powerpc/platforms/85xx/p2020.c


 \ /
  Last update: 2023-03-26 23:19    [W:0.243 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site