lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] dt-bindings: pinctrl: add schema for NXP S32 SoCs
Date
Add DT schema for the pinctrl driver of NXP S32 SoC family.

Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
Signed-off-by: Chester Lin <clin@suse.com>
---

Changes in v3:
- Remove the minItems from reg because there's no optional item for s32g2.
- List supported properties of pinmux-node and pincfg-node and add more
descriptions.
- Adjust the location of "required:".
- Fix descriptions and wordings.
- Rename the yaml file to nxp,s32g2-siul2-pinctrl.yaml.

Changes in v2:
- Remove the "nxp,pins" property since it has been moved into the driver.
- Add descriptions for reg entries.
- Refine the compatible name from "nxp,s32g-..." to "nxp,s32g2-...".
- Fix schema issues and revise the example.
- Fix the copyright format suggested by NXP.

.../pinctrl/nxp,s32g2-siul2-pinctrl.yaml | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
new file mode 100644
index 000000000000..1554ce14214a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2 pin controller
+
+maintainers:
+ - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
+ - Chester Lin <clin@suse.com>
+
+description: |
+ S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
+ whose memory map is split into two regions:
+ SIUL2_0 @ 0x4009c000
+ SIUL2_1 @ 0x44010000
+
+ Every SIUL2 region has multiple register types, and here only MSCR and
+ IMCR registers need to be revealed for kernel to configure pinmux.
+
+ Please note that some register indexes are reserved in S32G2, such as
+ MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
+
+properties:
+ compatible:
+ enum:
+ - nxp,s32g2-siul2-pinctrl
+
+ reg:
+ description: |
+ A list of MSCR/IMCR register regions to be reserved.
+ - MSCR (Multiplexed Signal Configuration Register)
+ An MSCR register can configure the associated pin as either a GPIO pin
+ or a function output pin depends on the selected signal source.
+ - IMCR (Input Multiplexed Signal Configuration Register)
+ An IMCR register can configure the associated pin as function input
+ pin depends on the selected signal source.
+ items:
+ - description: MSCR registers group 0 in SIUL2_0
+ - description: MSCR registers group 1 in SIUL2_1
+ - description: MSCR registers group 2 in SIUL2_1
+ - description: IMCR registers group 0 in SIUL2_0
+ - description: IMCR registers group 1 in SIUL2_1
+ - description: IMCR registers group 2 in SIUL2_1
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '-grp[0-9]$':
+ type: object
+ allOf:
+ - $ref: pinmux-node.yaml#
+ - $ref: pincfg-node.yaml#
+ description: |
+ Pinctrl node's client devices specify pin muxes using subnodes,
+ which in turn use the standard properties below.
+
+ properties:
+ bias-disable: true
+ bias-high-impedance: true
+ bias-pull-up: true
+ bias-pull-down: true
+ drive-open-drain: true
+ input-enable: true
+ output-enable: true
+
+ pinmux:
+ description: |
+ An integer array for representing pinmux configurations of
+ a device. Each integer consists of a PIN_ID and a 4-bit
+ selected signal source(SSS) as IOMUX setting, which is
+ calculated as: pinmux = (PIN_ID << 4 | SSS)
+
+ slew-rate:
+ description: |
+ 0: 208MHz
+ 1-3: Reserved
+ 4: 166MHz
+ 5: 150MHz
+ 6: 133MHz
+ 7: 83MHz
+ enum: [0, 4, 5, 6, 7]
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@4009c240 {
+ compatible = "nxp,s32g2-siul2-pinctrl";
+
+ /* MSCR0-MSCR101 registers on siul2_0 */
+ reg = <0x4009c240 0x198>,
+ /* MSCR112-MSCR122 registers on siul2_1 */
+ <0x44010400 0x2c>,
+ /* MSCR144-MSCR190 registers on siul2_1 */
+ <0x44010480 0xbc>,
+ /* IMCR0-IMCR83 registers on siul2_0 */
+ <0x4009ca40 0x150>,
+ /* IMCR119-IMCR397 registers on siul2_1 */
+ <0x44010c1c 0x45c>,
+ /* IMCR430-IMCR495 registers on siul2_1 */
+ <0x440110f8 0x108>;
+
+ llce-can0-pins {
+ llce-can0-grp0 {
+ pinmux = <0x2b0>;
+ input-enable;
+ slew-rate = <0>;
+ };
+
+ llce-can0-grp1 {
+ pinmux = <0x2c2>;
+ output-enable;
+ slew-rate = <0>;
+ };
+ };
+ };
+...
--
2.37.3
\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.107 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site