lkml.org 
[lkml]   [2022]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation
Date
As per GSI spec, link_rx bit is to be set on GO TRE on tx
channel whenever there is going to be a DMA TRE on rx
channel. This is currently set for duplex operation only.

Set the bit for rx operation as well.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
---
drivers/dma/qcom/gpi.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 061add8..59a36cb 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -1756,6 +1756,7 @@ static int gpi_create_spi_tre(struct gchan *chan, struct gpi_desc *desc,
tre->dword[3] = u32_encode_bits(TRE_TYPE_GO, TRE_FLAGS_TYPE);
if (spi->cmd == SPI_RX) {
tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOB);
+ tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_LINK);
} else if (spi->cmd == SPI_TX) {
tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_CHAIN);
} else { /* SPI_DUPLEX */
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.
\
 
 \ /
  Last update: 2022-11-30 13:21    [W:0.050 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site