lkml.org 
[lkml]   [2022]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation
From
Gentle reminder to review/approve please.

Thank you...


On 11/30/2022 5:50 PM, Vijaya Krishna Nivarthi wrote:
> As per GSI spec, link_rx bit is to be set on GO TRE on tx
> channel whenever there is going to be a DMA TRE on rx
> channel. This is currently set for duplex operation only.
>
> Set the bit for rx operation as well.
>
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> ---
> drivers/dma/qcom/gpi.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
> index 061add8..59a36cb 100644
> --- a/drivers/dma/qcom/gpi.c
> +++ b/drivers/dma/qcom/gpi.c
> @@ -1756,6 +1756,7 @@ static int gpi_create_spi_tre(struct gchan *chan, struct gpi_desc *desc,
> tre->dword[3] = u32_encode_bits(TRE_TYPE_GO, TRE_FLAGS_TYPE);
> if (spi->cmd == SPI_RX) {
> tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOB);
> + tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_LINK);
> } else if (spi->cmd == SPI_TX) {
> tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_CHAIN);
> } else { /* SPI_DUPLEX */

\
 
 \ /
  Last update: 2022-12-16 13:16    [W:0.080 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site