lkml.org 
[lkml]   [2022]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 7/7] drm: rcar-du: dsi: Add r8a779g0 support
Hi Tomi,

Thank you for the patch.

On Wed, Nov 23, 2022 at 08:59:46AM +0200, Tomi Valkeinen wrote:
> Add DSI support for r8a779g0. The main differences to r8a779a0 are in
> the PLL and PHTW setups.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
> drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 484 +++++++++++++++----
> drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h | 6 +-
> 2 files changed, 384 insertions(+), 106 deletions(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
> index a7f2b7f66a17..723c35726c38 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
> @@ -9,6 +9,7 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
> +#include <linux/math64.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> @@ -28,6 +29,20 @@
> #include "rcar_mipi_dsi.h"
> #include "rcar_mipi_dsi_regs.h"
>
> +#define MHZ(v) ((v) * 1000000u)

Isn't the U suffix usually spelled in uppercase ? Same below.

> +
> +enum rcar_mipi_dsi_hw_model {
> + RCAR_DSI_R8A779A0,
> + RCAR_DSI_R8A779G0,
> +};
> +
> +struct rcar_mipi_dsi_device_info {
> + enum rcar_mipi_dsi_hw_model model;
> + const struct dsi_clk_config *clk_cfg;
> + u8 clockset2_m_offset;
> + u8 clockset2_n_offset;
> +};
> +
> struct rcar_mipi_dsi {
> struct device *dev;
> const struct rcar_mipi_dsi_device_info *info;
> @@ -50,6 +65,17 @@ struct rcar_mipi_dsi {
> unsigned int lanes;
> };
>
> +struct dsi_setup_info {
> + unsigned long hsfreq;
> + u16 hsfreqrange;
> +
> + unsigned long fout;
> + u16 m;
> + u16 n;
> + u16 vclk_divider;
> + const struct dsi_clk_config *clkset;
> +};
> +
> static inline struct rcar_mipi_dsi *
> bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge)
> {
> @@ -62,22 +88,6 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host)
> return container_of(host, struct rcar_mipi_dsi, host);
> }
>
> -static const u32 phtw[] = {
> - 0x01020114, 0x01600115, /* General testing */
> - 0x01030116, 0x0102011d, /* General testing */
> - 0x011101a4, 0x018601a4, /* 1Gbps testing */
> - 0x014201a0, 0x010001a3, /* 1Gbps testing */
> - 0x0101011f, /* 1Gbps testing */
> -};
> -
> -static const u32 phtw2[] = {
> - 0x010c0130, 0x010c0140, /* General testing */
> - 0x010c0150, 0x010c0180, /* General testing */
> - 0x010c0190,
> - 0x010a0160, 0x010a0170,
> - 0x01800164, 0x01800174, /* 1Gbps testing */
> -};
> -
> static const u32 hsfreqrange_table[][2] = {
> { 80000000U, 0x00 }, { 90000000U, 0x10 }, { 100000000U, 0x20 },
> { 110000000U, 0x30 }, { 120000000U, 0x01 }, { 130000000U, 0x11 },
> @@ -103,24 +113,53 @@ static const u32 hsfreqrange_table[][2] = {
> { /* sentinel */ },
> };
>
> -struct vco_cntrl_value {
> +struct dsi_clk_config {
> u32 min_freq;
> u32 max_freq;
> - u16 value;
> + u8 vco_cntrl;
> + u8 cpbias_cntrl;
> + u8 gmp_cntrl;
> + u8 int_cntrl;
> + u8 prop_cntrl;
> };
>
> -static const struct vco_cntrl_value vco_cntrl_table[] = {
> - { .min_freq = 40000000U, .max_freq = 55000000U, .value = 0x3f },
> - { .min_freq = 52500000U, .max_freq = 80000000U, .value = 0x39 },
> - { .min_freq = 80000000U, .max_freq = 110000000U, .value = 0x2f },
> - { .min_freq = 105000000U, .max_freq = 160000000U, .value = 0x29 },
> - { .min_freq = 160000000U, .max_freq = 220000000U, .value = 0x1f },
> - { .min_freq = 210000000U, .max_freq = 320000000U, .value = 0x19 },
> - { .min_freq = 320000000U, .max_freq = 440000000U, .value = 0x0f },
> - { .min_freq = 420000000U, .max_freq = 660000000U, .value = 0x09 },
> - { .min_freq = 630000000U, .max_freq = 1149000000U, .value = 0x03 },
> - { .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 },
> - { .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 },
> +static const struct dsi_clk_config dsi_clk_cfg_r8a779a0[] = {
> + { 40000000u, 55000000u, 0x3f, 0x10, 0x01, 0x00, 0x0b },
> + { 52500000u, 80000000u, 0x39, 0x10, 0x01, 0x00, 0x0b },

Would MHZ(52.5) do the right thing ? If so, I'd use the macro through
those tables.

> + { 80000000u, 110000000u, 0x2f, 0x10, 0x01, 0x00, 0x0b },
> + { 105000000u, 160000000u, 0x29, 0x10, 0x01, 0x00, 0x0b },
> + { 160000000u, 220000000u, 0x1f, 0x10, 0x01, 0x00, 0x0b },
> + { 210000000u, 320000000u, 0x19, 0x10, 0x01, 0x00, 0x0b },
> + { 320000000u, 440000000u, 0x0f, 0x10, 0x01, 0x00, 0x0b },
> + { 420000000u, 660000000u, 0x09, 0x10, 0x01, 0x00, 0x0b },
> + { 630000000u, 1149000000u, 0x03, 0x10, 0x01, 0x00, 0x0b },
> + { 1100000000u, 1152000000u, 0x01, 0x10, 0x01, 0x00, 0x0b },
> + { 1150000000u, 1250000000u, 0x01, 0x10, 0x01, 0x00, 0x0c },
> + { /* sentinel */ },
> +};
> +
> +static const struct dsi_clk_config dsi_clk_cfg_r8a779g0[] = {
> + { 40000000u, 45310000u, 0x2b, 0x00, 0x00, 0x08, 0x0a },
> + { 45310000u, 54660000u, 0x28, 0x00, 0x00, 0x08, 0x0a },
> + { 54660000u, 62500000u, 0x28, 0x00, 0x00, 0x08, 0x0a },
> + { 62500000u, 75000000u, 0x27, 0x00, 0x00, 0x08, 0x0a },
> + { 75000000u, 90630000u, 0x23, 0x00, 0x00, 0x08, 0x0a },
> + { 90630000u, 109370000u, 0x20, 0x00, 0x00, 0x08, 0x0a },
> + { 109370000u, 125000000u, 0x20, 0x00, 0x00, 0x08, 0x0a },
> + { 125000000u, 150000000u, 0x1f, 0x00, 0x00, 0x08, 0x0a },
> + { 150000000u, 181250000u, 0x1b, 0x00, 0x00, 0x08, 0x0a },
> + { 181250000u, 218750000u, 0x18, 0x00, 0x00, 0x08, 0x0a },
> + { 218750000u, 250000000u, 0x18, 0x00, 0x00, 0x08, 0x0a },
> + { 250000000u, 300000000u, 0x17, 0x00, 0x00, 0x08, 0x0a },
> + { 300000000u, 362500000u, 0x13, 0x00, 0x00, 0x08, 0x0a },
> + { 362500000u, 455480000u, 0x10, 0x00, 0x00, 0x08, 0x0a },
> + { 455480000u, 500000000u, 0x10, 0x00, 0x00, 0x08, 0x0a },
> + { 500000000u, 600000000u, 0x0f, 0x00, 0x00, 0x08, 0x0a },
> + { 600000000u, 725000000u, 0x0b, 0x00, 0x00, 0x08, 0x0a },
> + { 725000000u, 875000000u, 0x08, 0x00, 0x00, 0x08, 0x0a },
> + { 875000000u, 1000000000u, 0x08, 0x00, 0x00, 0x08, 0x0a },
> + { 1000000000u, 1200000000u, 0x07, 0x00, 0x00, 0x08, 0x0a },
> + { 1200000000u, 1250000000u, 0x03, 0x00, 0x00, 0x08, 0x0a },
> { /* sentinel */ },
> };
>
> @@ -144,7 +183,7 @@ static void rcar_mipi_dsi_set(struct rcar_mipi_dsi *dsi, u32 reg, u32 set)
> rcar_mipi_dsi_write(dsi, reg, rcar_mipi_dsi_read(dsi, reg) | set);
> }
>
> -static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
> +static int rcar_mipi_dsi_write_phtw(struct rcar_mipi_dsi *dsi, u32 phtw)
> {
> u32 status;
> int ret;
> @@ -163,32 +202,231 @@ static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
> return ret;
> }
>
> +static int rcar_mipi_dsi_write_phtw_arr(struct rcar_mipi_dsi *dsi,
> + const u32 *phtw, unsigned int size)
> +{
> + for (unsigned int i = 0; i < size; i++) {
> + int ret = rcar_mipi_dsi_write_phtw(dsi, phtw[i]);
> +
> + if (ret < 0)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +#define WRITE_PHTW(...) \
> + ({ \
> + static const u32 phtw[] = { __VA_ARGS__ }; \
> + int ret; \
> + ret = rcar_mipi_dsi_write_phtw_arr(dsi, phtw, \
> + ARRAY_SIZE(phtw)); \
> + ret; \
> + })
> +
> +static int rcar_mipi_dsi_init_phtw_v3u(struct rcar_mipi_dsi *dsi)

You're mixing the R8A779* names and the short names. I'd use one of the
two and stick to it, probably the short name (up to you).

> +{
> + return WRITE_PHTW(0x01020114, 0x01600115, 0x01030116, 0x0102011d,
> + 0x011101a4, 0x018601a4, 0x014201a0, 0x010001a3,
> + 0x0101011f);
> +}
> +
> +static int rcar_mipi_dsi_post_init_phtw_v3u(struct rcar_mipi_dsi *dsi)
> +{
> + return WRITE_PHTW(0x010c0130, 0x010c0140, 0x010c0150, 0x010c0180,
> + 0x010c0190, 0x010a0160, 0x010a0170, 0x01800164,
> + 0x01800174);
> +}
> +
> +static int rcar_mipi_dsi_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
> + const struct dsi_setup_info *setup_info)
> +{
> + int ret;
> +
> + if (setup_info->hsfreq < MHZ(450)) {
> + ret = WRITE_PHTW(0x01010100, 0x011b01ac);
> + if (ret)
> + return ret;
> + }
> +
> + ret = WRITE_PHTW(0x01010100, 0x01030173, 0x01000174, 0x01500175,
> + 0x01030176, 0x01040166, 0x010201ad);
> + if (ret)
> + return ret;
> +
> + if (setup_info->hsfreq <= MHZ(1000))
> + ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171,
> + 0x01110172);
> + else if (setup_info->hsfreq <= MHZ(1500))
> + ret = WRITE_PHTW(0x01020100, 0x01980170, 0x01030171,
> + 0x01100172);
> + else if (setup_info->hsfreq <= MHZ(2500))
> + ret = WRITE_PHTW(0x01020100, 0x0144016b, 0x01000172);
> + else
> + return -EINVAL;
> +
> + if (ret)
> + return ret;
> +
> + if (dsi->lanes <= 1) {
> + ret = WRITE_PHTW(0x01070100, 0x010e010b);
> + if (ret)
> + return ret;
> + }
> +
> + if (dsi->lanes <= 2) {
> + ret = WRITE_PHTW(0x01090100, 0x010e010b);
> + if (ret)
> + return ret;
> + }
> +
> + if (dsi->lanes <= 3) {
> + ret = WRITE_PHTW(0x010b0100, 0x010e010b);
> + if (ret)
> + return ret;
> + }
> +
> + if (setup_info->hsfreq <= MHZ(1500)) {
> + ret = WRITE_PHTW(0x01010100, 0x01c0016e);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int
> +rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
> + const struct dsi_setup_info *setup_info)
> +{
> + u32 status;
> + int ret;
> +
> + if (setup_info->hsfreq <= MHZ(1500)) {
> + WRITE_PHTW(0x01020100, 0x00000180);
> +
> + ret = read_poll_timeout(rcar_mipi_dsi_read, status,
> + status & PHTR_TEST, 2000, 10000, false,
> + dsi, PHTR);
> + if (ret < 0) {
> + dev_err(dsi->dev, "failed to test PHTR\n");
> + return ret;
> + }
> +
> + WRITE_PHTW(0x01010100, 0x0100016e);
> + }
> +
> + return 0;
> +}
> +
> /* -----------------------------------------------------------------------------
> * Hardware Setup
> */
>
> -struct dsi_setup_info {
> - unsigned long fout;
> - u16 vco_cntrl;
> - u16 prop_cntrl;
> - u16 hsfreqrange;
> - u16 div;
> - unsigned int m;
> - unsigned int n;
> -};
> +static void rcar_mipi_dsi_pll_calc_r8a779a0(struct rcar_mipi_dsi *dsi,
> + struct clk *clk,
> + unsigned long fout_target,
> + struct dsi_setup_info *setup_info)
> +{
> + unsigned int best_err = -1;
> + unsigned long fin;
> +
> + fin = clk_get_rate(clk);
> +
> + for (unsigned int n = 3; n <= 8; n++) {
> + unsigned long fpfd;
> +
> + fpfd = fin / n;
> +
> + if (fpfd < MHZ(2) || fpfd > MHZ(8))
> + continue;
> +
> + for (unsigned int m = 64; m <= 625; m++) {
> + unsigned int err;
> + u64 fout;
> +
> + fout = (u64)fpfd * m;
> +
> + if (fout < MHZ(320) || fout > MHZ(1250))
> + continue;
> +
> + fout = div64_u64(fout, setup_info->vclk_divider);
> +
> + if (fout < setup_info->clkset->min_freq ||
> + fout > setup_info->clkset->max_freq)
> + continue;
> +
> + err = abs((long)(fout - fout_target) * 10000 /
> + (long)fout_target);
> +
> + if (err < best_err) {
> + setup_info->m = m;
> + setup_info->n = n;
> + setup_info->fout = (unsigned long)fout;
> + best_err = err;
> +
> + if (err == 0)
> + return;
> + }
> + }
> + }
> +}
> +
> +static void rcar_mipi_dsi_pll_calc_r8a779g0(struct rcar_mipi_dsi *dsi,
> + struct clk *clk,
> + unsigned long fout_target,
> + struct dsi_setup_info *setup_info)
> +{
> + unsigned int best_err = -1;
> + unsigned long fin;
> +
> + fin = clk_get_rate(clk);

This could move to the caller.

> +
> + for (unsigned int n = 1; n <= 8; n++) {
> + unsigned long fpfd;
> +
> + fpfd = fin / n;
> +
> + if (fpfd < MHZ(8) || fpfd > MHZ(24))
> + continue;
> +
> + for (unsigned int m = 167; m <= 1000; m++) {
> + unsigned int err;
> + u64 fout;
> +
> + fout = div64_u64((u64)fpfd * m, 2);
> +
> + if (fout < MHZ(2000) || fout > MHZ(4000))
> + continue;
> +
> + fout = div64_u64(fout, setup_info->vclk_divider);
> +
> + if (fout < setup_info->clkset->min_freq ||
> + fout > setup_info->clkset->max_freq)
> + continue;
> +
> + err = abs((long)(fout - fout_target) * 10000 /
> + (long)fout_target);

Add a blank line here, or remove it from the previous function.

> + if (err < best_err) {
> + setup_info->m = m;
> + setup_info->n = n;
> + setup_info->fout = (unsigned long)fout;
> + best_err = err;
> +
> + if (err == 0)
> + return;
> + }
> + }
> + }
> +}

This function could be parameterized, up to you.

>
> static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
> struct clk *clk, unsigned long target,
> struct dsi_setup_info *setup_info)
> {
>
> - const struct vco_cntrl_value *vco_cntrl;
> + const struct dsi_clk_config *clkset;
> unsigned long fout_target;
> - unsigned long fin, fout;
> - unsigned long hsfreq;
> - unsigned int best_err = -1;
> - unsigned int divider;
> - unsigned int n;
> unsigned int i;
> unsigned int err;
>
> @@ -198,70 +436,53 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
> */
> fout_target = target * mipi_dsi_pixel_format_to_bpp(dsi->format)
> / (2 * dsi->lanes);
> - if (fout_target < 40000000 || fout_target > 1250000000)
> + if (fout_target < MHZ(40) || fout_target > MHZ(1250))
> return;
>
> /* Find vco_cntrl */
> - for (vco_cntrl = vco_cntrl_table; vco_cntrl->min_freq != 0; vco_cntrl++) {
> - if (fout_target > vco_cntrl->min_freq &&
> - fout_target <= vco_cntrl->max_freq) {
> - setup_info->vco_cntrl = vco_cntrl->value;
> - if (fout_target >= 1150000000)
> - setup_info->prop_cntrl = 0x0c;
> - else
> - setup_info->prop_cntrl = 0x0b;
> + for (clkset = dsi->info->clk_cfg; clkset->min_freq != 0; clkset++) {
> + if (fout_target > clkset->min_freq &&
> + fout_target <= clkset->max_freq) {
> + setup_info->clkset = clkset;
> break;
> }
> }
>
> - /* Add divider */
> - setup_info->div = (setup_info->vco_cntrl & 0x30) >> 4;
> + switch (dsi->info->model) {
> + case RCAR_DSI_R8A779A0:
> + setup_info->vclk_divider = 1 << ((clkset->vco_cntrl >> 4) & 0x3);

If you stored (clkset->vco_cntrl >> 4) & 0x3 in setup_info->vclk_divider
you wouldn't have to use __ffs() in rcar_mipi_dsi_startup(). You could
also drop the - 1 there, which would allow dropping one of the
switch(dsi->info->model). You can store the real divider value in
setup_info separately for rcar_mipi_dsi_pll_calc_r8a779a0(), or pass it
to the function.

> + rcar_mipi_dsi_pll_calc_r8a779a0(dsi, clk, fout_target, setup_info);
> + break;
> +
> + case RCAR_DSI_R8A779G0:
> + setup_info->vclk_divider = 1 << (((clkset->vco_cntrl >> 3) & 0x7) + 1);
> + rcar_mipi_dsi_pll_calc_r8a779g0(dsi, clk, fout_target, setup_info);
> + break;
> +
> + default:
> + return;
> + }
>
> /* Find hsfreqrange */
> - hsfreq = fout_target * 2;
> + setup_info->hsfreq = setup_info->fout * 2;
> for (i = 0; i < ARRAY_SIZE(hsfreqrange_table); i++) {
> - if (hsfreqrange_table[i][0] >= hsfreq) {
> + if (hsfreqrange_table[i][0] >= setup_info->hsfreq) {
> setup_info->hsfreqrange = hsfreqrange_table[i][1];
> break;
> }
> }
>
> - /*
> - * Calculate n and m for PLL clock
> - * Following the HW manual the ranges of n and m are
> - * n = [3-8] and m = [64-625]
> - */

I'd keep the comment in rcar_mipi_dsi_pll_calc_r8a779a0(), and add a
similar comment in rcar_mipi_dsi_pll_calc_r8a779g0().

> - fin = clk_get_rate(clk);
> - divider = 1 << setup_info->div;
> - for (n = 3; n < 9; n++) {
> - unsigned long fpfd;
> - unsigned int m;
> -
> - fpfd = fin / n;
> -
> - for (m = 64; m < 626; m++) {
> - fout = fpfd * m / divider;
> - err = abs((long)(fout - fout_target) * 10000 /
> - (long)fout_target);
> - if (err < best_err) {
> - setup_info->m = m - 2;
> - setup_info->n = n - 1;
> - setup_info->fout = fout;
> - best_err = err;
> - if (err == 0)
> - goto done;
> - }
> - }
> - }
> + err = abs((long)(setup_info->fout - fout_target) * 10000 / (long)fout_target);
>
> -done:
> dev_dbg(dsi->dev,
> - "%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/DIV %u/%u/%u\n",
> - clk, fin, setup_info->fout, fout_target, best_err / 100,
> - best_err % 100, setup_info->m, setup_info->n, setup_info->div);
> + "Fout = %u * %lu / (2 * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n",

Is the "2 *" valid on V3U too ?

> + setup_info->m, clk_get_rate(clk), setup_info->n, setup_info->vclk_divider,

If you keep the clk_get_rate() call in this function you wouldn't have
to call it again here.

> + setup_info->fout, fout_target,
> + err / 100, err % 100);
> +
> dev_dbg(dsi->dev,
> "vco_cntrl = 0x%x\tprop_cntrl = 0x%x\thsfreqrange = 0x%x\n",
> - setup_info->vco_cntrl, setup_info->prop_cntrl,
> + clkset->vco_cntrl, clkset->prop_cntrl,
> setup_info->hsfreqrange);
> }
>
> @@ -324,7 +545,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
> {
> struct dsi_setup_info setup_info = {};
> unsigned int timeout;
> - int ret, i;
> + int ret;
> int dsi_format;
> u32 phy_setup;
> u32 clockset2, clockset3;
> @@ -360,10 +581,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
> phy_setup |= PHYSETUP_HSFREQRANGE(setup_info.hsfreqrange);
> rcar_mipi_dsi_write(dsi, PHYSETUP, phy_setup);
>
> - for (i = 0; i < ARRAY_SIZE(phtw); i++) {
> - ret = rcar_mipi_dsi_phtw_test(dsi, phtw[i]);
> + switch (dsi->info->model) {
> + case RCAR_DSI_R8A779A0:
> + ret = rcar_mipi_dsi_init_phtw_v3u(dsi);
> + if (ret < 0)
> + return ret;
> + break;
> +
> + case RCAR_DSI_R8A779G0:
> + ret = rcar_mipi_dsi_init_phtw_v4h(dsi, &setup_info);
> if (ret < 0)
> return ret;
> + break;
> +
> + default:
> + return -ENODEV;

This can't happen. Same below.

> }
>
> /* PLL Clock Setting */
> @@ -371,12 +603,13 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
> rcar_mipi_dsi_set(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
> rcar_mipi_dsi_clr(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
>
> - clockset2 = CLOCKSET2_M(setup_info.m) | CLOCKSET2_N(setup_info.n)
> - | CLOCKSET2_VCO_CNTRL(setup_info.vco_cntrl);
> - clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.prop_cntrl)
> - | CLOCKSET3_INT_CNTRL(0)
> - | CLOCKSET3_CPBIAS_CNTRL(0x10)
> - | CLOCKSET3_GMP_CNTRL(1);
> + clockset2 = CLOCKSET2_M(setup_info.m - dsi->info->clockset2_m_offset)
> + | CLOCKSET2_N(setup_info.n - dsi->info->clockset2_n_offset)
> + | CLOCKSET2_VCO_CNTRL(setup_info.clkset->vco_cntrl);
> + clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.clkset->prop_cntrl)
> + | CLOCKSET3_INT_CNTRL(setup_info.clkset->int_cntrl)
> + | CLOCKSET3_CPBIAS_CNTRL(setup_info.clkset->cpbias_cntrl)
> + | CLOCKSET3_GMP_CNTRL(setup_info.clkset->gmp_cntrl);
> rcar_mipi_dsi_write(dsi, CLOCKSET2, clockset2);
> rcar_mipi_dsi_write(dsi, CLOCKSET3, clockset3);
>
> @@ -407,10 +640,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
> return -ETIMEDOUT;
> }
>
> - for (i = 0; i < ARRAY_SIZE(phtw2); i++) {
> - ret = rcar_mipi_dsi_phtw_test(dsi, phtw2[i]);
> + switch (dsi->info->model) {
> + case RCAR_DSI_R8A779A0:
> + ret = rcar_mipi_dsi_post_init_phtw_v3u(dsi);
> if (ret < 0)
> return ret;
> + break;
> +
> + case RCAR_DSI_R8A779G0:
> + ret = rcar_mipi_dsi_post_init_phtw_v4h(dsi, &setup_info);
> + if (ret < 0)
> + return ret;
> + break;
> +
> + default:
> + return -ENODEV;
> }
>
> /* Enable DOT clock */
> @@ -427,8 +671,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
> dev_warn(dsi->dev, "unsupported format");
> return -EINVAL;
> }
> - vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div)
> - | VCLKSET_LANE(dsi->lanes - 1);
> +
> + vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1);
> +
> + switch (dsi->info->model) {
> + case RCAR_DSI_R8A779A0:
> + vclkset |= VCLKSET_DIV_R8A779A0(__ffs(setup_info.vclk_divider));
> + break;
> +
> + case RCAR_DSI_R8A779G0:
> + vclkset |= VCLKSET_DIV_R8A779G0(__ffs(setup_info.vclk_divider) - 1);
> + break;
> +
> + default:
> + return -ENODEV;
> + }
>
> rcar_mipi_dsi_write(dsi, VCLKSET, vclkset);
>
> @@ -841,8 +1098,25 @@ static int rcar_mipi_dsi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct rcar_mipi_dsi_device_info r8a779a0_data = {
> + .model = RCAR_DSI_R8A779A0,
> + .clk_cfg = dsi_clk_cfg_r8a779a0,
> + .clockset2_m_offset = 2,
> + .clockset2_n_offset = 1,
> +

Extra blank line.

> +};
> +
> +static const struct rcar_mipi_dsi_device_info r8a779g0_data = {
> + .model = RCAR_DSI_R8A779G0,
> + .clk_cfg = dsi_clk_cfg_r8a779g0,
> + .clockset2_m_offset = 0,
> + .clockset2_n_offset = 1,

You could possibly drop clockset2_n_offset as it's identical for the two
variants, and there's no indication it would be different in another
version of the IP core.

> +

Here too.

> +};
> +
> static const struct of_device_id rcar_mipi_dsi_of_table[] = {
> - { .compatible = "renesas,r8a779a0-dsi-csi2-tx" },
> + { .compatible = "renesas,r8a779a0-dsi-csi2-tx", .data = &r8a779a0_data },
> + { .compatible = "renesas,r8a779g0-dsi-csi2-tx", .data = &r8a779g0_data },
> { }
> };
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
> index 2eaca54636f3..608851340acf 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
> @@ -122,7 +122,8 @@
> #define VCLKSET_CKEN (1 << 16)
> #define VCLKSET_COLOR_RGB (0 << 8)
> #define VCLKSET_COLOR_YCC (1 << 8)
> -#define VCLKSET_DIV(x) (((x) & 0x3) << 4)
> +#define VCLKSET_DIV_R8A779A0(x) (((x) & 0x3) << 4)
> +#define VCLKSET_DIV_R8A779G0(x) (((x) & 0x7) << 4)
> #define VCLKSET_BPP_16 (0 << 2)
> #define VCLKSET_BPP_18 (1 << 2)
> #define VCLKSET_BPP_18L (2 << 2)
> @@ -166,6 +167,9 @@
> #define PHTW_CWEN (1 << 8)
> #define PHTW_TESTDIN_CODE(x) (((x) & 0xff) << 0)
>
> +#define PHTR 0x1038
> +#define PHTR_TEST (1 << 16)
> +
> #define PHTC 0x103c
> #define PHTC_TESTCLR (1 << 0)
>

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2022-11-29 02:50    [W:0.423 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site