lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up
Date
The hardware turns out to be pretty sluggish at assuming it can only
do USB2 with just a USB2 phy assigned to it - before it needed about
6 minutes to acknowledge that.

Limit it to USB-HS explicitly to make USB come up about 720x faster.

Fixes: 9da65e441d4d ("arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
No words.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index 12a7b6d91dbe..0ab9687f3406 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -991,10 +991,6 @@ touch_int_sleep: touch-int-sleep-state {
};
};

-/*
- * For reasons that are currently unknown (but probably related to fusb301), USB takes about
- * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
- */
&usb3 {
status = "okay";
qcom,select-utmi-as-pipe-clk;
@@ -1003,6 +999,7 @@ &usb3 {
&usb3_dwc3 {
extcon = <&usb3_id>;
dr_mode = "peripheral";
+ maximum-speed = "high-speed";
phys = <&hsusb_phy1>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;
--
2.38.1
\
 
 \ /
  Last update: 2022-11-24 23:02    [W:0.066 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site