lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up
From
On 24/11/2022 23:01, Konrad Dybcio wrote:
> The hardware turns out to be pretty sluggish at assuming it can only
> do USB2 with just a USB2 phy assigned to it - before it needed about
> 6 minutes to acknowledge that.
>
> Limit it to USB-HS explicitly to make USB come up about 720x faster.
>
> Fixes: 9da65e441d4d ("arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> No words.
>
> arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> index 12a7b6d91dbe..0ab9687f3406 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> @@ -991,10 +991,6 @@ touch_int_sleep: touch-int-sleep-state {
> };
> };
>
> -/*
> - * For reasons that are currently unknown (but probably related to fusb301), USB takes about
> - * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
> - */
> &usb3 {
> status = "okay";
> qcom,select-utmi-as-pipe-clk;
> @@ -1003,6 +999,7 @@ &usb3 {
> &usb3_dwc3 {
> extcon = <&usb3_id>;
> dr_mode = "peripheral";
> + maximum-speed = "high-speed";
> phys = <&hsusb_phy1>;
> phy-names = "usb2-phy";
> snps,hird-threshold = /bits/ 8 <0>;


Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

\
 
 \ /
  Last update: 2022-11-25 09:19    [W:0.092 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site