lkml.org 
[lkml]   [2022]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] add ti tmag5273 driver
Date
Hi all,

This patch set adds support for the TI TMAG5273 Low-Power Linear 3D Hall-
Effect Sensor. Additionally to temperature and magnetic X, Y and Z-axes the
angle and magnitude are reported. The sensor is operating in continuous
measurement mode and changes to sleep mode if not used for 5 seconds.

Tests were done on a ROCK3 Model A board using the TMAG5273 evaluation
module.

Regards,
Gerald Loacker

Gerald Loacker (2):
dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
iio: magnetometer: add ti tmag5273 driver

.../iio/magnetometer/ti,tmag5273.yaml | 72 ++
MAINTAINERS | 7 +
drivers/iio/magnetometer/Kconfig | 12 +
drivers/iio/magnetometer/Makefile | 2 +
drivers/iio/magnetometer/tmag5273.c | 809 ++++++++++++++++++
5 files changed, 902 insertions(+)
create mode 100644 .../bindings/iio/magnetometer/ti,tmag5273.yaml
create mode 100644 drivers/iio/magnetometer/tmag5273.c

--
2.37.2

\
 
 \ /
  Last update: 2022-11-15 08:38    [W:0.071 / U:1.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site