lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] ASoC: dt-bindings: qcom,wsa883x: Use correct SD_N polarity
From


On 10/11/2022 13:35, Krzysztof Kozlowski wrote:
> Use correct polarity in example and powerdown-gpios description.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>
> Changes since v1:
> 1. New patch.
> ---
> Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
> index 6113f65f2990..99f9c10bbc83 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
> @@ -23,7 +23,7 @@ properties:
> maxItems: 1
>
> powerdown-gpios:
> - description: GPIO spec for Powerdown/Shutdown line to use
> + description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N)
> maxItems: 1
>
> vdd-supply:
> @@ -47,6 +47,8 @@ additionalProperties: false
>
> examples:
> - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> soundwire-controller@3250000 {
> #address-cells = <2>;
> #size-cells = <0>;
> @@ -55,7 +57,7 @@ examples:
> speaker@0,1 {
> compatible = "sdw10217020200";
> reg = <0 1>;
> - powerdown-gpios = <&tlmm 1 0>;
> + powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
> vdd-supply = <&vreg_s10b_1p8>;
> #thermal-sensor-cells = <0>;
> #sound-dai-cells = <0>;
> @@ -64,7 +66,7 @@ examples:
> speaker@0,2 {
> compatible = "sdw10217020200";
> reg = <0 2>;
> - powerdown-gpios = <&tlmm 89 0>;
> + powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
> vdd-supply = <&vreg_s10b_1p8>;
> #thermal-sensor-cells = <0>;
> #sound-dai-cells = <0>;

\
 
 \ /
  Last update: 2022-11-11 17:42    [W:0.051 / U:1.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site