lkml.org 
[lkml]   [2022]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] RISC-V: stop selecting device drivers in Kconfig.socs
Date
From: Conor Dooley <conor.dooley@microchip.com>

As my RFC [0] series doing the symbol name changes has not yet reached
consensus, I've split out the removal of device driver selects into a
new series. I kept the plic as a direct select - although given how Maz
is treating the SiFive plic driver as the RISC-V plic driver, maybe that
should just be selected by default at an arch level...

I assume the individual patches can go via their subsystems & I'll
resubmit the arch/riscv patches a cycle later? I'm not in any rush.

Thanks,
Conor.

0 - https://lore.kernel.org/linux-riscv/20220923185605.1900083-1-conor@kernel.org/

Conor Dooley (6):
clk: sifive: select by default if SOC_SIFIVE
serial: sifive: select by default if SOC_SIFIVE
serial: sifive: select by default if SOC_CANAAN
riscv: stop selecting the PolarFire SoC clock driver
riscv: stop selecting SiFive clock and serial drivers directly
riscv: stop directly selecting drivers for SOC_CANAAN

arch/riscv/Kconfig.socs | 8 --------
drivers/clk/sifive/Kconfig | 4 +++-
drivers/tty/serial/Kconfig | 2 ++
3 files changed, 5 insertions(+), 9 deletions(-)

--
2.37.3

\
 
 \ /
  Last update: 2022-10-05 19:15    [W:0.058 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site