lkml.org 
[lkml]   [2022]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/6] RISC-V: stop selecting device drivers in Kconfig.socs
On Wed, Oct 05, 2022 at 06:13:43PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> As my RFC [0] series doing the symbol name changes has not yet reached
> consensus, I've split out the removal of device driver selects into a
> new series. I kept the plic as a direct select - although given how Maz
> is treating the SiFive plic driver as the RISC-V plic driver, maybe that
> should just be selected by default at an arch level...
>
> I assume the individual patches can go via their subsystems & I'll
> resubmit the arch/riscv patches a cycle later? I'm not in any rush.

Hey,

What's the story here with the two serial patches, they just waiting for
an Ack? I think these are archived on the riscv patchwork, so if that is
the case I'll unarchive them and mark as needing one.

Thanks,
Conor.

>
> 0 - https://lore.kernel.org/linux-riscv/20220923185605.1900083-1-conor@kernel.org/
>
> Conor Dooley (6):
> clk: sifive: select by default if SOC_SIFIVE
> serial: sifive: select by default if SOC_SIFIVE
> serial: sifive: select by default if SOC_CANAAN
> riscv: stop selecting the PolarFire SoC clock driver
> riscv: stop selecting SiFive clock and serial drivers directly
> riscv: stop directly selecting drivers for SOC_CANAAN
>
> arch/riscv/Kconfig.socs | 8 --------
> drivers/clk/sifive/Kconfig | 4 +++-
> drivers/tty/serial/Kconfig | 2 ++
> 3 files changed, 5 insertions(+), 9 deletions(-)
>
> --
> 2.37.3
>

\
 
 \ /
  Last update: 2022-10-30 13:02    [W:0.065 / U:1.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site