[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings
On 28/10/2022 09:35, Johan Hovold wrote:
> The current QMP PCIe PHY bindings are based on the original MSM8996
> binding which provided multiple PHYs per IP block and these in turn were
> described by child nodes.
> Later QMP PCIe PHY blocks only provide a single PHY and the remnant
> child node does not really reflect the hardware.
> The original MSM8996 binding also ended up describing the individual
> register blocks as belonging to either the wrapper node or the PHY child
> nodes.
> This is an unnecessary level of detail which has lead to problems when
> later IP blocks using different register layouts have been forced to fit
> the original mould rather than updating the binding. The bindings are
> arguable also incomplete as they only the describe register blocks used
> by the current Linux drivers (e.g. does not include the per lane PCS
> registers).
> In preparation for adding new bindings for SC8280XP which further
> bindings can be based on, rename the current schema file after IPQ8074,
> which was the first SoC added to the bindings after MSM8996 (which has
> already been split out), and add a reference to the SC8280XP bindings.
> Reviewed-by: Krzysztof Kozlowski <>
> Signed-off-by: Johan Hovold <>
> ---

Also missing cc devicetree list.

Best regards,

 \ /
  Last update: 2022-10-28 23:58    [W:0.163 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site