Messages in this thread | | | Date | Sat, 29 Oct 2022 10:47:51 +0200 | From | Johan Hovold <> | Subject | Re: [PATCH v4 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings |
| |
On Fri, Oct 28, 2022 at 05:57:01PM -0400, Krzysztof Kozlowski wrote: > On 28/10/2022 09:35, Johan Hovold wrote: > > The current QMP PCIe PHY bindings are based on the original MSM8996 > > binding which provided multiple PHYs per IP block and these in turn were > > described by child nodes. > > > > Later QMP PCIe PHY blocks only provide a single PHY and the remnant > > child node does not really reflect the hardware. > > > > The original MSM8996 binding also ended up describing the individual > > register blocks as belonging to either the wrapper node or the PHY child > > nodes. > > > > This is an unnecessary level of detail which has lead to problems when > > later IP blocks using different register layouts have been forced to fit > > the original mould rather than updating the binding. The bindings are > > arguable also incomplete as they only the describe register blocks used > > by the current Linux drivers (e.g. does not include the per lane PCS > > registers). > > > > In preparation for adding new bindings for SC8280XP which further > > bindings can be based on, rename the current schema file after IPQ8074, > > which was the first SoC added to the bindings after MSM8996 (which has > > already been split out), and add a reference to the SC8280XP bindings. > > > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > > --- > > Also missing cc devicetree list.
Yes, I know, but as I mentioned in my reply to Rob on the QMP USB series, I do not intend to repost this series unless someone insists as there were no binding-related changes in v4 (or v3).
Johan
| |