lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: Remove fingerprint node from herobrine-r1
Date
It turns out that only a few people have the fingerprint sensor hooked
up on their board. Leaving this enabled is slowing down boot for
everyone else because the driver slowly fails to probe while trying to
communicate with a sensor that isn't there. Remove the node to speed up
boot, developers with the board can manually enable it themselves.

Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts | 4 ----
1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index c1a671968725..8d07401d852d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -47,10 +47,6 @@ &pp1200_wf_cam {

/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */

-&ap_spi_fp {
- status = "okay";
-};
-
/*
* Although the trackpad is really part of the herobrine baseboard, we'll
* put the actual definition in the board device tree since different boards
base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
--
https://chromeos.dev

\
 
 \ /
  Last update: 2022-10-25 20:08    [W:0.141 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site