lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: qcom: Remove fingerprint node from herobrine-r1
Hi,

On Tue, Oct 25, 2022 at 11:07 AM Stephen Boyd <swboyd@chromium.org> wrote:
>
> It turns out that only a few people have the fingerprint sensor hooked
> up on their board. Leaving this enabled is slowing down boot for
> everyone else because the driver slowly fails to probe while trying to
> communicate with a sensor that isn't there. Remove the node to speed up
> boot, developers with the board can manually enable it themselves.
>
> Reported-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
> arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts | 4 ----
> 1 file changed, 4 deletions(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

\
 
 \ /
  Last update: 2022-10-25 21:39    [W:0.043 / U:1.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site