lkml.org 
[lkml]   [2022]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/4] Watchdog: sp5100_tco: Move timer initialization into function
Date
Refactor driver's timer initialization into new function. This is needed
inorder to support adding new device layouts while using common timer
initialization.

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
To: Guenter Roeck <linux@roeck-us.net>
To: linux-watchdog@vger.kernel.org
To: Jean Delvare <jdelvare@suse.com>
To: linux-i2c@vger.kernel.org
To: Wolfram Sang <wsa@kernel.org>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
---
drivers/watchdog/sp5100_tco.c | 65 +++++++++++++++++++----------------
1 file changed, 36 insertions(+), 29 deletions(-)

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index dd9a744f82f8..ecc273b9b17f 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -223,6 +223,41 @@ static u32 sp5100_tco_read_pm_reg32(u8 index)
return val;
}

+static int sp5100_tco_timer_init(struct sp5100_tco *tco)
+{
+ struct watchdog_device *wdd = &tco->wdd;
+ struct device *dev = wdd->parent;
+ u32 val;
+
+ val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+ if (val & SP5100_WDT_DISABLED) {
+ dev_err(dev, "Watchdog hardware is disabled\n");
+ return(-ENODEV);
+ }
+
+ /*
+ * Save WatchDogFired status, because WatchDogFired flag is
+ * cleared here.
+ */
+ if (val & SP5100_WDT_FIRED)
+ wdd->bootstatus = WDIOF_CARDRESET;
+
+ /* Set watchdog action to reset the system */
+ val &= ~SP5100_WDT_ACTION_RESET;
+ writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+ /* Set a reasonable heartbeat before we stop the timer */
+ tco_timer_set_timeout(wdd, wdd->timeout);
+
+ /*
+ * Stop the TCO before we change anything so we don't race with
+ * a zeroed timer.
+ */
+ tco_timer_stop(wdd);
+
+ return 0;
+}
+
static int sp5100_tco_setupdevice(struct device *dev,
struct watchdog_device *wdd)
{
@@ -348,35 +383,7 @@ static int sp5100_tco_setupdevice(struct device *dev,
/* Setup the watchdog timer */
tco_timer_enable(tco);

- val = readl(SP5100_WDT_CONTROL(tco->tcobase));
- if (val & SP5100_WDT_DISABLED) {
- dev_err(dev, "Watchdog hardware is disabled\n");
- ret = -ENODEV;
- goto unreg_region;
- }
-
- /*
- * Save WatchDogFired status, because WatchDogFired flag is
- * cleared here.
- */
- if (val & SP5100_WDT_FIRED)
- wdd->bootstatus = WDIOF_CARDRESET;
- /* Set watchdog action to reset the system */
- val &= ~SP5100_WDT_ACTION_RESET;
- writel(val, SP5100_WDT_CONTROL(tco->tcobase));
-
- /* Set a reasonable heartbeat before we stop the timer */
- tco_timer_set_timeout(wdd, wdd->timeout);
-
- /*
- * Stop the TCO before we change anything so we don't race with
- * a zeroed timer.
- */
- tco_timer_stop(wdd);
-
- release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
-
- return 0;
+ ret = sp5100_tco_timer_init(tco);

unreg_region:
release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
--
2.30.2
\
 
 \ /
  Last update: 2022-01-18 21:23    [W:0.320 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site