lkml.org 
[lkml]   [2021]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/10] clk: aspeed: ast2600: Porting sdhci clock source
Date
- There are two clock sources used to generate
SD/SDIO clock, APLL clock and HCLK (200MHz).
User can select which clock source should be used
by configuring SCU310[8].
- The SD/SDIO clock divider selection table SCU310[30:28]
is different between AST2600-A1 and AST2600-A2/A3.
For AST2600-A1, 200MHz SD/SDIO clock cannot be
gotten by the dividers in SCU310[30:28] if APLL
is not the multiple of 200MHz and HCLK is 200MHz.
For AST2600-A2/A3, a new divider, "1", is added and
200MHz SD/SDIO clock can be obtained by adopting HCLK
as clock source and setting SCU310[30:28] to 3b'111.

Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
---
drivers/clk/clk-ast2600.c | 69 ++++++++++++++++++++++++++++++++++-----
1 file changed, 61 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index bc3be5f3eae1..a6778c18274a 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -168,6 +168,30 @@ static const struct clk_div_table ast2600_div_table[] = {
{ 0 }
};

+static const struct clk_div_table ast2600_sd_div_a1_table[] = {
+ { 0x0, 2 },
+ { 0x1, 4 },
+ { 0x2, 6 },
+ { 0x3, 8 },
+ { 0x4, 10 },
+ { 0x5, 12 },
+ { 0x6, 14 },
+ { 0x7, 16 },
+ { 0 }
+};
+
+static const struct clk_div_table ast2600_sd_div_a2_table[] = {
+ { 0x0, 2 },
+ { 0x1, 4 },
+ { 0x2, 6 },
+ { 0x3, 8 },
+ { 0x4, 10 },
+ { 0x5, 12 },
+ { 0x6, 14 },
+ { 0x7, 1 },
+ { 0 }
+};
+
/* For hpll/dpll/epll/mpll */
static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
{
@@ -424,6 +448,11 @@ static const char *const emmc_extclk_parent_names[] = {
"mpll",
};

+static const char *const sd_extclk_parent_names[] = {
+ "hclk",
+ "apll",
+};
+
static const char * const vclk_parent_names[] = {
"dpll",
"d1pll",
@@ -523,18 +552,42 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
return PTR_ERR(hw);
aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;

- /* SD/SDIO clock divider and gate */
- hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0,
- scu_g6_base + ASPEED_G6_CLK_SELECTION4, 31, 0,
- &aspeed_g6_clk_lock);
+ clk_hw_register_fixed_rate(NULL, "hclk", NULL, 0, 200000000);
+
+ regmap_read(map, 0x310, &val);
+ hw = clk_hw_register_mux(dev, "sd_extclk_mux",
+ sd_extclk_parent_names,
+ ARRAY_SIZE(sd_extclk_parent_names), 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION4, 8, 1,
+ 0, &aspeed_g6_clk_lock);
if (IS_ERR(hw))
return PTR_ERR(hw);
- hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate",
- 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
- ast2600_div_table,
- &aspeed_g6_clk_lock);
+
+ hw = clk_hw_register_gate(dev, "sd_extclk_gate", "sd_extclk_mux",
+ 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4,
+ 31, 0, &aspeed_g6_clk_lock);
if (IS_ERR(hw))
return PTR_ERR(hw);
+
+ regmap_read(map, 0x14, &val);
+ /* AST2600-A2/A3 clock divisor is different from AST2600-A1 */
+ if (((val & GENMASK(23, 16)) >> 16) >= 2) {
+ /* AST2600-A2/A3 */
+ hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate",
+ 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
+ ast2600_sd_div_a2_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ } else {
+ /* AST2600-A1 */
+ hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate",
+ 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
+ ast2600_sd_div_a1_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ }
aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;

/* MAC1/2 RMII 50MHz RCLK */
--
2.17.1
\
 
 \ /
  Last update: 2021-09-22 12:33    [W:0.169 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site