lkml.org 
[lkml]   [2021]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 01/10] clk: aspeed: ast2600: Porting sdhci clock source
Date
Hi Joel,

Thanks for the review.

> -----Original Message-----
> From: Joel Stanley <joel@jms.id.au>
> Sent: Thursday, September 23, 2021 8:02 AM
> To: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> Subject: Re: [PATCH 01/10] clk: aspeed: ast2600: Porting sdhci clock source
>
> On Wed, 22 Sept 2021 at 10:31, Chin-Ting Kuo
> <chin-ting_kuo@aspeedtech.com> wrote:
> >
> > - There are two clock sources used to generate
> > SD/SDIO clock, APLL clock and HCLK (200MHz).
> > User can select which clock source should be used
> > by configuring SCU310[8].
> > - The SD/SDIO clock divider selection table SCU310[30:28]
> > is different between AST2600-A1 and AST2600-A2/A3.
> > For AST2600-A1, 200MHz SD/SDIO clock cannot be
> > gotten by the dividers in SCU310[30:28] if APLL
> > is not the multiple of 200MHz and HCLK is 200MHz.
> > For AST2600-A2/A3, a new divider, "1", is added and
> > 200MHz SD/SDIO clock can be obtained by adopting HCLK
> > as clock source and setting SCU310[30:28] to 3b'111.
> >
> > Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> > ---
> > drivers/clk/clk-ast2600.c | 69
> > ++++++++++++++++++++++++++++++++++-----
> > 1 file changed, 61 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
> > index bc3be5f3eae1..a6778c18274a 100644
> > --- a/drivers/clk/clk-ast2600.c
> > +++ b/drivers/clk/clk-ast2600.c
> > @@ -168,6 +168,30 @@ static const struct clk_div_table ast2600_div_table[]
> = {
> > { 0 }
> > };
> >
> > +static const struct clk_div_table ast2600_sd_div_a1_table[] = {
>
> Let's put the revision next to the ast2600 like the other tables:
>
> ast2600_a1_sd_div_table
>
> > + { 0x0, 2 },
> > + { 0x1, 4 },
> > + { 0x2, 6 },
> > + { 0x3, 8 },
> > + { 0x4, 10 },
> > + { 0x5, 12 },
> > + { 0x6, 14 },
> > + { 0x7, 16 },
> > + { 0 }
> > +};
> > +
> > +static const struct clk_div_table ast2600_sd_div_a2_table[] = {
>

Okay, this will be updated in the next patch version.

> For naming; can I propose we omit the revision for the A2/A3+ case? So this
> one would be called:
>
> ast2600_sd_div_table
>

Okay, this will also be updated in the next patch version.

> > + { 0x0, 2 },
> > + { 0x1, 4 },
> > + { 0x2, 6 },
> > + { 0x3, 8 },
> > + { 0x4, 10 },
> > + { 0x5, 12 },
> > + { 0x6, 14 },
> > + { 0x7, 1 },
> > + { 0 }
> > +};
> > +
> > /* For hpll/dpll/epll/mpll */
> > static struct clk_hw *ast2600_calc_pll(const char *name, u32 val) {
> > @@ -424,6 +448,11 @@ static const char *const
> emmc_extclk_parent_names[] = {
> > "mpll",
> > };
> >
> > +static const char *const sd_extclk_parent_names[] = {
> > + "hclk",
> > + "apll",
> > +};
> > +
> > static const char * const vclk_parent_names[] = {
> > "dpll",
> > "d1pll",
> > @@ -523,18 +552,42 @@ static int aspeed_g6_clk_probe(struct
> platform_device *pdev)
> > return PTR_ERR(hw);
> > aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;
> >
> > - /* SD/SDIO clock divider and gate */
> > - hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0,
> > - scu_g6_base + ASPEED_G6_CLK_SELECTION4,
> 31, 0,
> > - &aspeed_g6_clk_lock);
> > + clk_hw_register_fixed_rate(NULL, "hclk", NULL, 0, 200000000);
> > +
> > + regmap_read(map, 0x310, &val);
>
> Use the #defines for the register number.

Okay.

>
> > + hw = clk_hw_register_mux(dev, "sd_extclk_mux",
> > + sd_extclk_parent_names,
> > +
> ARRAY_SIZE(sd_extclk_parent_names), 0,
> > + scu_g6_base +
> ASPEED_G6_CLK_SELECTION4, 8, 1,
> > + 0, &aspeed_g6_clk_lock);
> > if (IS_ERR(hw))
> > return PTR_ERR(hw);
> > - hw = clk_hw_register_divider_table(dev, "sd_extclk",
> "sd_extclk_gate",
> > - 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4,
> 28, 3, 0,
> > - ast2600_div_table,
> > - &aspeed_g6_clk_lock);
> > +
> > + hw = clk_hw_register_gate(dev, "sd_extclk_gate", "sd_extclk_mux",
> > + 0, scu_g6_base +
> ASPEED_G6_CLK_SELECTION4,
> > + 31, 0, &aspeed_g6_clk_lock);
> > if (IS_ERR(hw))
> > return PTR_ERR(hw);
> > +
> > + regmap_read(map, 0x14, &val);
> > + /* AST2600-A2/A3 clock divisor is different from AST2600-A1 */
> > + if (((val & GENMASK(23, 16)) >> 16) >= 2) {
>
> I've got a little patch that I recommend you base your series on (feel free to
> include it in your series when posting v2 to make it
> self-contained):
>
> https://lore.kernel.org/all/20210922235449.213631-1-joel@jms.id.au/
>
> With this one you can do:
>
> const struct clk_div_table* table;
>
> if (soc_rev >= 2)
> table = ast2600_sd_div_table;
> else
> table = ast2600_a1_sd_div_table;
>
> Then you don't need to duplicate the registration for each case:
>
> hw = clk_hw_register_divider_table(dev, "sd_extclk",
> "sd_extclk_gate",
> 0, scu_g6_base +
> ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
> table,
> &aspeed_g6_clk_lock);
> if (IS_ERR(hw))
> return PTR_ERR(hw);
>

Okay, I will include your patch into this patch series when posting v2.

> > + /* AST2600-A2/A3 */
> > + hw = clk_hw_register_divider_table(dev, "sd_extclk",
> "sd_extclk_gate",
> > + 0, scu_g6_base +
> ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
> > + ast2600_sd_div_a2_table,
> > + &aspeed_g6_clk_lock);
> > + if (IS_ERR(hw))
> > + return PTR_ERR(hw);
> > + } else {
> > + /* AST2600-A1 */
> > + hw = clk_hw_register_divider_table(dev, "sd_extclk",
> "sd_extclk_gate",
> > + 0, scu_g6_base +
> ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
> > + ast2600_sd_div_a1_table,
> > + &aspeed_g6_clk_lock);
> > + if (IS_ERR(hw))
> > + return PTR_ERR(hw);
> > + }
> > aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;
> >
> > /* MAC1/2 RMII 50MHz RCLK */
> > --
> > 2.17.1
> >
\
 
 \ /
  Last update: 2021-09-23 07:31    [W:0.150 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site