lkml.org 
[lkml]   [2021]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/10] sdhci: aspeed: Add SDR50 support
Date
From the analog waveform analysis result, SD/SDIO controller
of AST2600 cannot always work well with 200MHz. The upper bound
stable frequency for SD/SDIO controller is 100MHz. Thus, SDR50
supported bit, instead of SDR104, in capability 2 register
should be set in advance.

Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
---
drivers/mmc/host/sdhci-of-aspeed.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index 6e4e132903a6..c6eaeb02e3f9 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -35,6 +35,8 @@
#define ASPEED_SDC_CAP1_1_8V (0 * 32 + 26)
/* SDIO{14,24} */
#define ASPEED_SDC_CAP2_SDR104 (1 * 32 + 1)
+/* SDIO{14,24} */
+#define ASPEED_SDC_CAP2_SDR50 (1 * 32 + 0)

struct aspeed_sdc {
struct clk *clk;
@@ -410,11 +412,17 @@ static int aspeed_sdhci_probe(struct platform_device *pdev)
sdhci_get_of_property(pdev);

if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
+ of_property_read_bool(np, "sd-uhs-sdr50") ||
of_property_read_bool(np, "sd-uhs-sdr104")) {
aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V,
true, slot);
}

+ if (of_property_read_bool(np, "sd-uhs-sdr50")) {
+ aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR50,
+ true, slot);
+ }
+
if (of_property_read_bool(np, "sd-uhs-sdr104")) {
aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
true, slot);
--
2.17.1
\
 
 \ /
  Last update: 2021-09-22 12:33    [W:0.212 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site