lkml.org 
[lkml]   [2021]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv1 0/3] Add Reset controller to Ethernet PHY
Date
It is being observed some time the Ethernet interface
will not send / recive any packet after reboot.

Earlier I had submitted Ethernet reset ID patch
but it did not resolve it issue much, Adding new
reset controller of the Ethernet PHY for Amlogic SoC
could help resolve the issue.

Thanks
-Anand

Anand Moon (3):
arm64: dts: amlogic: add missing ethernet reset ID
ARM: dts: meson: Use new reset id for reset controller
net: stmmac: dwmac-meson8b: Add reset controller for ethernet phy

arch/arm/boot/dts/meson8b.dtsi | 2 +-
arch/arm/boot/dts/meson8m2.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 ++
.../boot/dts/amlogic/meson-g12-common.dtsi | 2 ++
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 3 +++
.../ethernet/stmicro/stmmac/dwmac-meson8b.c | 20 +++++++++++++++++++
6 files changed, 29 insertions(+), 2 deletions(-)

--
2.32.0

\
 
 \ /
  Last update: 2021-07-29 22:12    [W:1.912 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site