lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] rtl8xxxu: disable interrupt_in transfer for 8188cu and 8192cu
Date
From: Chris Chiu <chris.chiu@canonical.com>

There will be crazy numbers of interrupts triggered by 8188cu and
8192cu module, around 8000~10000 interrupts per second, on the usb
host controller. Compare with the vendor driver source code, it's
mapping to the configuration CONFIG_USB_INTERRUPT_IN_PIPE and it is
disabled by default.

Since the interrupt transfer is neither used for TX/RX nor H2C
commands. Disable it to avoid the confusing interrupts for the
8188cu and 8192cu module which I only have for verification.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 03c6ed7efe06..6a3dfa71b27f 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -1670,7 +1670,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
priv->rf_paths = 2;
priv->rx_paths = 2;
priv->tx_paths = 2;
- priv->usb_interrupts = 1;
+ priv->usb_interrupts = 0;
priv->rtl_chip = RTL8192C;
}
priv->has_wifi = 1;
@@ -1680,7 +1680,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
priv->rx_paths = 1;
priv->tx_paths = 1;
priv->rtl_chip = RTL8188C;
- priv->usb_interrupts = 1;
+ priv->usb_interrupts = 0;
priv->has_wifi = 1;
}

--
2.20.1
\
 
 \ /
  Last update: 2021-07-01 18:35    [W:0.095 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site