lkml.org 
[lkml]   [2021]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: rtl8xxxu: disable interrupt_in transfer for 8188cu and 8192cu
From
Date
chris.chiu@canonical.com wrote:

> From: Chris Chiu <chris.chiu@canonical.com>
>
> There will be crazy numbers of interrupts triggered by 8188cu and
> 8192cu module, around 8000~10000 interrupts per second, on the usb
> host controller. Compare with the vendor driver source code, it's
> mapping to the configuration CONFIG_USB_INTERRUPT_IN_PIPE and it is
> disabled by default.
>
> Since the interrupt transfer is neither used for TX/RX nor H2C
> commands. Disable it to avoid the excessive amount of interrupts
> for the 8188cu and 8192cu module which I only have for verification.
>
> Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
> Tested-by: reto.schneider@husqvarnagroup.com
> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>

Patch applied to wireless-drivers-next.git, thanks.

f62cdab7f5db rtl8xxxu: disable interrupt_in transfer for 8188cu and 8192cu

--
https://patchwork.kernel.org/project/linux-wireless/patch/20210701163354.118403-1-chris.chiu@canonical.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2021-08-21 20:19    [W:0.106 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site