[lkml]   [2021]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ARM: dts: stm32: set stm32mp157c-odyssey DCMI pins
Hello Ahmad,

On Thu, Jun 03, 2021 at 04:26:59PM +0200, Ahmad Fatoum wrote:
> On 03.06.21 16:23, Grzegorz Szymaszek wrote:
> > The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
> > stm32mp15-pinctrl.dtsi contains one pin state definition for the DCMI
> > interface, dcmi-0, AKA phandle dcmi_pins_a. This definition is
> > incompatible with the pins used on the Odyssey board, where:
> > - there are 8 data pins instead of 12,
> > - […]
> >
> > Override the dcmi_pins_a definition (as well as dcmi_sleep_pins_a) in
> > the Odyssey device tree.
> Rather define a new pinctrl group (e.g. &dcmi_pins_b) and use that
> instead of overriding an existing one.

Can I simply use dcmi_pins_b (as the first unused identifier) or is
there some way to match specific pin groups to an identifier (b, c, d,
and so on)?

> Current convention is also to place all STM32MP1 pinctrl nodes into
> a central file, not in the individual board device trees.

Sure, I will update the patch.

Thanks for your comments!


 \ /
  Last update: 2021-06-03 16:50    [W:0.045 / U:1.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site