lkml.org 
[lkml]   [2021]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.12 024/178] net: lantiq: disable interrupt before sheduling NAPI
Date
From: Aleksander Jan Bajkowski <olek2@wp.pl>

[ Upstream commit f2386cf7c5f4ff5d7b584f5d92014edd7df6c676 ]

This patch fixes TX hangs with threaded NAPI enabled. The scheduled
NAPI seems to be executed in parallel with the interrupt on second
thread. Sometimes it happens that ltq_dma_disable_irq() is executed
after xrx200_tx_housekeeping(). The symptom is that TX interrupts
are disabled in the DMA controller. As a result, the TX hangs after
a few seconds of the iperf test. Scheduling NAPI after disabling
interrupts fixes this issue.

Tested on Lantiq xRX200 (BT Home Hub 5A).

Fixes: 9423361da523 ("net: lantiq: Disable IRQs only if NAPI gets scheduled ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/lantiq_xrx200.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index 135ba5b6ae98..3da494df72f3 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -352,8 +352,8 @@ static irqreturn_t xrx200_dma_irq(int irq, void *ptr)
struct xrx200_chan *ch = ptr;

if (napi_schedule_prep(&ch->napi)) {
- __napi_schedule(&ch->napi);
ltq_dma_disable_irq(&ch->dma);
+ __napi_schedule(&ch->napi);
}

ltq_dma_ack_irq(&ch->dma);
--
2.30.2


\
 
 \ /
  Last update: 2021-06-21 18:41    [W:0.637 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site