lkml.org 
[lkml]   [2021]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH net-next v1 4/9] net: dsa: qca: ar9331: make proper initial port defaults
On Sat, Apr 03, 2021 at 01:48:43PM +0200, Oleksij Rempel wrote:
> Make sure that all external port are actually isolated from each other,
> so no packets are leaked.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/net/dsa/qca/ar9331.c | 145 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 143 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
> index 9a5035b2f0ff..a3de3598fbf5 100644
> --- a/drivers/net/dsa/qca/ar9331.c
> +++ b/drivers/net/dsa/qca/ar9331.c
> @@ -60,10 +60,19 @@
>
> /* MIB registers */
> #define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100))
>
> @@ -229,6 +278,7 @@ struct ar9331_sw_priv {
> struct regmap *regmap;
> struct reset_control *sw_reset;
> struct ar9331_sw_port port[AR9331_SW_PORTS];
> + int cpu_port;
> };
>
> static struct ar9331_sw_priv *ar9331_sw_port_to_priv(struct ar9331_sw_port *port)
> @@ -371,12 +421,72 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
> return 0;
> }
>
> -static int ar9331_sw_setup(struct dsa_switch *ds)
> +static int ar9331_sw_setup_port(struct dsa_switch *ds, int port)
> {
> struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
> struct regmap *regmap = priv->regmap;
> + u32 port_mask, port_ctrl, val;
> int ret;
>
> + /* Generate default port settings */
> + port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE,
> + AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED);
> +
> + if (dsa_is_cpu_port(ds, port)) {
> + /*
> + * CPU port should be allowed to communicate with all user
> + * ports.
> + */
> + //port_mask = dsa_user_ports(ds);

Code commented out should ideally not be part of a submitted patch.
And the networking comment style is:

/* CPU port should be allowed to communicate with all user
* ports.
*/

> + port_mask = 0;
> + /*
> + * Enable atheros header on CPU port. This will allow us
> + * communicate with each port separately
> + */
> + port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
> + port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN;
> + } else if (dsa_is_user_port(ds, port)) {
> + /*
> + * User ports should communicate only with the CPU port.
> + */
> + port_mask = BIT(priv->cpu_port);

For all you care, the CPU port here is dsa_to_port(ds, port)->cpu_dp->index,
no need to go to those lengths in order to find it. DSA does not have a
fixed number for the CPU port but a CPU port pointer per port in order
to not close the door for the future support of multiple CPU ports.

> + /* Enable unicast address learning by default */
> + port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN
> + /* IGMP snooping seems to work correctly, let's use it */
> + | AR9331_SW_PORT_CTRL_IGMP_MLD_EN

I don't really like this ad-hoc enablement of IGMP/MLD snooping from the driver,
please add the pass-through in DSA for SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED
(dsa_slave_port_attr_set, dsa_port_switchdev_sync, dsa_port_switchdev_unsync
should all call a dsa_switch_ops :: port_snoop_igmp_mld function) and then
toggle this bit from there.

> + | AR9331_SW_PORT_CTRL_SINGLE_VLAN_EN;
> + } else {
> + /* Other ports do not need to communicate at all */
> + port_mask = 0;
> + }
> +
> + val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE,
> + AR9331_SW_8021Q_MODE_NONE) |
> + FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask) |
> + FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID,
> + AR9331_SW_PORT_VLAN_PORT_VID_DEF);
> +
> + ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val);
> + if (ret)
> + goto error;
> +
> + ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl);
> + if (ret)
> + goto error;
> +
> + return 0;
> +error:
> + dev_err_ratelimited(priv->dev, "%s: error: %i\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +static int ar9331_sw_setup(struct dsa_switch *ds)
> +{
> + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
> + struct regmap *regmap = priv->regmap;
> + int ret, i;
> +
> ret = ar9331_sw_reset(priv);
> if (ret)
> return ret;
> @@ -390,7 +500,8 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
>
> /* Do not drop broadcast frames */
> ret = regmap_write_bits(regmap, AR9331_SW_REG_FLOOD_MASK,
> - AR9331_SW_FLOOD_MASK_BROAD_TO_CPU,
> + AR9331_SW_FLOOD_MASK_BROAD_TO_CPU
> + | AR9331_SW_FLOOD_MASK_MULTI_FLOOD_DP,
> AR9331_SW_FLOOD_MASK_BROAD_TO_CPU);
> if (ret)
> goto error;
> @@ -402,6 +513,36 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
> if (ret)
> goto error;
>
> + /*
> + * Configure the ARL:
> + * AR9331_SW_AT_ARP_EN - why?
> + * AR9331_SW_AT_LEARN_CHANGE_EN - why?
> + */

Good question, why?

> + ret = regmap_set_bits(regmap, AR9331_SW_REG_ADDR_TABLE_CTRL,
> + AR9331_SW_AT_ARP_EN |
> + AR9331_SW_AT_LEARN_CHANGE_EN);
> + if (ret)
> + goto error;
> +
> + /* find the CPU port */
> + priv->cpu_port = -1;
> + for (i = 0; i < ds->num_ports; i++) {
> + if (!dsa_is_cpu_port(ds, i))
> + continue;
> +
> + if (priv->cpu_port != -1)
> + dev_err_ratelimited(priv->dev, "%s: more then one CPU port. Already set: %i, trying to add: %i\n",

than, not then

> + __func__, priv->cpu_port, i);
> + else
> + priv->cpu_port = i;
> + }
> +
> + for (i = 0; i < ds->num_ports; i++) {
> + ret = ar9331_sw_setup_port(ds, i);
> + if (ret)
> + goto error;
> + }
> +
> ds->configure_vlan_while_not_filtering = false;
>
> return 0;
> --
> 2.29.2
>

\
 
 \ /
  Last update: 2021-04-04 02:17    [W:0.177 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site