lkml.org 
[lkml]   [2021]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: DMA-buf and uncached system memory
From
Date


Am 15.02.21 um 10:06 schrieb Simon Ser:
> On Monday, February 15th, 2021 at 9:58 AM, Christian König <christian.koenig@amd.com> wrote:
>
>> we are currently working an Freesync and direct scan out from system
>> memory on AMD APUs in A+A laptops.
>>
>> On problem we stumbled over is that our display hardware needs to scan
>> out from uncached system memory and we currently don't have a way to
>> communicate that through DMA-buf.
>>
>> For our specific use case at hand we are going to implement something
>> driver specific, but the question is should we have something more
>> generic for this?
>>
>> After all the system memory access pattern is a PCIe extension and as
>> such something generic.
> Intel also needs uncached system memory if I'm not mistaken?

No idea, that's why I'm asking. Could be that this is also interesting
for I+A systems.

> Where are the buffers allocated? If GBM, then it needs to allocate memory that
> can be scanned out if the USE_SCANOUT flag is set or if a scanout-capable
> modifier is picked.
>
> If this is about communicating buffer constraints between different components
> of the stack, there were a few proposals about it. The most recent one is [1].

Well the problem here is on a different level of the stack.

See resolution, pitch etc:.. can easily communicated in userspace
without involvement of the kernel. The worst thing which can happen is
that you draw garbage into your own application window.

But if you get the caching attributes in the page tables (both CPU as
well as IOMMU, device etc...) wrong then ARM for example has the
tendency to just spontaneously reboot

X86 is fortunately a bit more gracefully and you only end up with random
data corruption, but that is only marginally better.

So to sum it up that is not something which we can leave in the hands of
userspace.

I think that exporters in the DMA-buf framework should have the ability
to tell importers if the system memory snooping is necessary or not.

Userspace components can then of course tell the exporter what the
importer needs, but validation if that stuff is correct and doesn't
crash the system must happen in the kernel.

Regards,
Christian.

>
> Simon
>
> [1]: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fxdc2020.x.org%2Fevent%2F9%2Fcontributions%2F615%2F&amp;data=04%7C01%7Cchristian.koenig%40amd.com%7Cb2824bd79bd44862b38e08d8d190f344%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637489767796900783%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=hIptfin5Xx6XlYBtGFYAAbfuNsnD6kmQEiggq9k10E8%3D&amp;reserved=0

\
 
 \ /
  Last update: 2021-02-15 10:38    [W:0.170 / U:1.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site