lkml.org 
[lkml]   [2022]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: DMA-buf and uncached system memory
From
Date
Le mardi 16 février 2021 à 10:25 +0100, Daniel Vetter a écrit :
> So I think if AMD also guarantees to drop clean cachelines just do the
> same thing we do right now for intel integrated + discrete amd, but in
> reserve. It's fragile, but it does work.

Sorry to disrupt, but if you pass V4L2 vmalloc data to Intel display driver, you
also get nice dirt on the screen. If you have a UVC webcam that produces a pixel
format compatible with your display, you can reproduce the issue quite easily
with:

gst-launch-1.0 v4l2src device=/dev/video0 ! kmssink

p.s. some frame-rate are less likely to exhibit the issue, make sure you create
movement to see it.

The only solution I could think of (not implemented) was to detect in the
attach() call what the importers can do (with dev->coherent_dma_mask if I
recall), and otherwise flush the cache immediately and start flushing the cache
from now on signalling it for DQBUF (in vb2 workqueue or dqbuf ioctl, I don't
have an idea yet). I bet this idea is inapplicable to were you have fences, we
don't have that in v4l2.

This idea was hinted by Robert Becket (now in CC), but perhaps I picked it up
wrong, explaining it wrong, etc. I'm no expert, just noticed there wasn't really
a good plan for that, so one needs to make one up. I'm not aware oh an importer
could know how the memory was allocated by the exporter, and worst, how an
importer could figure-out that the export is going to produce buffer with hot
CPU cache (UVC driver does memcpy from USB chunks of variable size to produce a
fixed size image).

Nicolas

\
 
 \ /
  Last update: 2022-06-22 21:42    [W:0.191 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site