Messages in this thread | | | From | Nobuhiro Iwamatsu <> | Subject | [PATCH v2 0/2] pwm: visconti: Add Toshiba Visconti SoC PWM support | Date | Fri, 12 Feb 2021 22:19:08 +0900 |
| |
This series is the PWM driver for Toshiba's ARM SoC, Visconti[0]. This provides DT binding documentation and device driver.
[0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html
Updates:
dt-bindings: pwm: Add bindings for Toshiba Visconti PWM Controller v1 -> v2: - Change SPDX-License-Identifier to GPL-2.0-only OR BSD-2-Clause. - Set compatible toshiba,pwm-visconti only. - Drop unnecessary comments.
pwm: visconti: Add Toshiba Visconti SoC PWM support v1 -> v2: - Change SPDX-License-Identifier to GPL-2.0-only. - Add prefix for the register defines. - Drop struct device from struct visconti_pwm_chip. - Use '>>' instead of '/'. - Drop error message by devm_platform_ioremap_resource(). - Use dev_err_probe instead of dev_err. - Change dev_info to dev_dbg. - Remove some empty lines. - Fix MODULE_ALIAS to platform:pwm-visconti. - Add .get_state() function. - Use the author name and email address to MODULE_AUTHOR. - Add more comment to function of the hardware. - Support .get_status() function. - Use NSEC_PER_USEC instead of 1000. - Alphabetically sorted for Makefile and Kconfig. - Added check for set value in visconti_pwm_apply().
Nobuhiro Iwamatsu (2): dt-bindings: pwm: Add bindings for Toshiba Visconti PWM Controller pwm: visconti: Add Toshiba Visconti SoC PWM support
.../bindings/pwm/toshiba,pwm-visconti.yaml | 43 +++++ drivers/pwm/Kconfig | 9 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-visconti.c | 173 ++++++++++++++++++ 4 files changed, 226 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml create mode 100644 drivers/pwm/pwm-visconti.c
-- 2.30.0.rc2
| |