lkml.org 
[lkml]   [2021]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v12, 13/19] media: mtk-vcodec: Add work queue for core hardware decode
On Wed, Dec 1, 2021 at 7:46 PM Yunfei Dong <yunfei.dong@mediatek.com> wrote:
>
> Add work queue to process core hardware information.
> First, get lat_buf from message queue, then call core
> hardware of each codec(H264/VP9/AV1) to decode, finally
> puts lat_buf back to the message.
>
> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> ---
> .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 16 +++++++-
> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 ++
> .../platform/mtk-vcodec/vdec_msg_queue.c | 41 ++++++++++++++++---
> .../platform/mtk-vcodec/vdec_msg_queue.h | 8 ++--
> 4 files changed, 57 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> index d460703f335d..4fbff61d2334 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> @@ -341,6 +341,17 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
> goto err_dec_pm;
> }
>
> + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch)) {
> + vdec_msg_queue_init_ctx(&dev->msg_queue_core_ctx, MTK_VDEC_CORE);
> + dev->core_workqueue = alloc_ordered_workqueue("core-decoder",
> + WQ_MEM_RECLAIM | WQ_FREEZABLE);
> + if (!dev->core_workqueue) {
> + mtk_v4l2_err("Failed to create core workqueue");
> + ret = -EINVAL;
> + goto err_res;
> + }
> + }
> +
> for (i = 0; i < MTK_VDEC_HW_MAX; i++)
> mutex_init(&dev->dec_mutex[i]);
> spin_lock_init(&dev->irqlock);
> @@ -351,7 +362,7 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
> ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
> if (ret) {
> mtk_v4l2_err("v4l2_device_register err=%d", ret);
> - goto err_res;
> + goto err_core_workq;
> }
>
> init_waitqueue_head(&dev->queue);
> @@ -450,6 +461,9 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
> video_unregister_device(vfd_dec);
> err_dec_alloc:
> v4l2_device_unregister(&dev->v4l2_dev);
> +err_core_workq:
> + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch))
> + destroy_workqueue(dev->core_workqueue);
> err_res:
> mtk_vcodec_release_dec_pm(&dev->pm);
> err_dec_pm:
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index cbaed96dcfa2..a558cc16026d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -27,6 +27,7 @@
> #define MTK_VCODEC_MAX_PLANES 3
> #define MTK_V4L2_BENCHMARK 0
> #define WAIT_INTR_TIMEOUT_MS 1000
> +#define IS_VDEC_LAT_ARCH(hw_arch) ((hw_arch) >= MTK_VDEC_LAT_SINGLE_CORE)

Basic question: What is practical meaning of this? What architectures
are supported?

>
> /*
> * enum mtk_hw_reg_idx - MTK hw register base index
> @@ -464,6 +465,7 @@ struct mtk_vcodec_enc_pdata {
> * @dec_capability: used to identify decode capability, ex: 4k
> * @enc_capability: used to identify encode capability
> *
> + * @core_workqueue: queue used for core hardware decode
> * @msg_queue_core_ctx: msg queue context used for core workqueue
> *
> * @subdev_dev: subdev hardware device
> @@ -506,6 +508,7 @@ struct mtk_vcodec_dev {
> unsigned int dec_capability;
> unsigned int enc_capability;
>
> + struct workqueue_struct *core_workqueue;
> struct vdec_msg_queue_ctx msg_queue_core_ctx;
>
> void *subdev_dev[MTK_VDEC_HW_MAX];
> diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c
> index 913aefa67618..24f1d03df9f1 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c
> +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c
> @@ -68,6 +68,9 @@ int vdec_msg_queue_qbuf(struct vdec_msg_queue_ctx *msg_ctx, struct vdec_lat_buf
>
> if (msg_ctx->hardware_index != MTK_VDEC_CORE)
> wake_up_all(&msg_ctx->ready_to_use);
> + else
> + queue_work(buf->ctx->dev->core_workqueue,
> + &buf->ctx->msg_queue.core_work);

need {} for else here?

>
> mtk_v4l2_debug(3, "enqueue buf type: %d addr: 0x%p num: %d",
> msg_ctx->hardware_index, buf, msg_ctx->ready_num);
> @@ -169,8 +172,7 @@ bool vdec_msg_queue_wait_lat_buf_full(struct vdec_msg_queue *msg_queue)
> return false;
> }
>
> -void vdec_msg_queue_deinit(
> - struct vdec_msg_queue *msg_queue,
> +void vdec_msg_queue_deinit(struct vdec_msg_queue *msg_queue,
> struct mtk_vcodec_ctx *ctx)
> {
> struct vdec_lat_buf *lat_buf;
> @@ -196,10 +198,36 @@ void vdec_msg_queue_deinit(
> }
> }
>
> -int vdec_msg_queue_init(
> - struct vdec_msg_queue *msg_queue,
> - struct mtk_vcodec_ctx *ctx,
> - core_decode_cb_t core_decode,
> +static void vdec_msg_queue_core_work(struct work_struct *work)
> +{
> + struct vdec_msg_queue *msg_queue =
> + container_of(work, struct vdec_msg_queue, core_work);
> + struct mtk_vcodec_ctx *ctx =
> + container_of(msg_queue, struct mtk_vcodec_ctx, msg_queue);
> + struct mtk_vcodec_dev *dev = ctx->dev;
> + struct vdec_lat_buf *lat_buf;
> +
> + lat_buf = vdec_msg_queue_dqbuf(&dev->msg_queue_core_ctx);
> + if (!lat_buf)
> + return;

If we were to return in this error condition,
isn't it better to also differentiate this error with return code and
change void return type?

> +
> + ctx = lat_buf->ctx;
> + mtk_vcodec_set_curr_ctx(dev, ctx, MTK_VDEC_CORE);
> +
> + lat_buf->core_decode(lat_buf);
> +
> + mtk_vcodec_set_curr_ctx(dev, NULL, MTK_VDEC_CORE);
> + vdec_msg_queue_qbuf(&ctx->msg_queue.lat_ctx, lat_buf);
> +
> + if (!list_empty(&ctx->msg_queue.lat_ctx.ready_queue)) {
> + mtk_v4l2_debug(3, "re-schedule to decode for core",
> + dev->msg_queue_core_ctx.ready_num);
> + queue_work(dev->core_workqueue, &msg_queue->core_work);
> + }
> +}
> +
> +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue,
> + struct mtk_vcodec_ctx *ctx, core_decode_cb_t core_decode,
> int private_size)
> {
> struct vdec_lat_buf *lat_buf;
> @@ -210,6 +238,7 @@ int vdec_msg_queue_init(
> return 0;
>
> vdec_msg_queue_init_ctx(&msg_queue->lat_ctx, MTK_VDEC_LAT0);
> + INIT_WORK(&msg_queue->core_work, vdec_msg_queue_core_work);
> msg_queue->wdma_addr.size = vde_msg_queue_get_trans_size(
> ctx->picinfo.buf_w, ctx->picinfo.buf_h);
>
> diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h
> index 21a9c0aeb1b4..43eae638a2a8 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h
> +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h
> @@ -67,6 +67,7 @@ struct vdec_lat_buf {
> * @wdma_addr: wdma address used for ube
> * @wdma_rptr_addr: ube read point
> * @wdma_wptr_addr: ube write point
> + * @core_work: core hardware work
> * @lat_ctx: used to store lat buffer list
> */
> struct vdec_msg_queue {
> @@ -76,6 +77,7 @@ struct vdec_msg_queue {
> uint64_t wdma_rptr_addr;
> uint64_t wdma_wptr_addr;
>
> + struct work_struct core_work;
> struct vdec_msg_queue_ctx lat_ctx;
> };
>
> @@ -86,10 +88,8 @@ struct vdec_msg_queue {
> * @core_decode: core decode callback for each codec
> * @private_size: the private data size used to share with core
> */
> -int vdec_msg_queue_init(
> - struct vdec_msg_queue *msg_queue,
> - struct mtk_vcodec_ctx *ctx,
> - core_decode_cb_t core_decode,
> +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue,
> + struct mtk_vcodec_ctx *ctx, core_decode_cb_t core_decode,

Not sure about the formatting rule, but is it supposed to be one param per line?
If so, this comment also applied to function definition part.

> int private_size);
>
> /**
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-12-10 00:45    [W:0.133 / U:1.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site