lkml.org 
[lkml]   [2021]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v12, 06/19] media: mtk-vcodec: Add to support multi hardware decode
Few comments and questions.

On Wed, Dec 1, 2021 at 7:46 PM Yunfei Dong <yunfei.dong@mediatek.com> wrote:
>
> There are more than two hardwares for decoder: LAT0, LAT1 and CORE. In order to
> manage these hardwares, register each hardware as independent platform device
> for the larbs are different.

basic question: what is "larbs"?

>
> Each hardware module controls its own information which includes interrupt/power/
> clocks/registers.
>
> Calling of_platform_populate in parent device, and use subdev_bitmap to record
> whether the hardwares are registered done.

nit: s/registered done/registered/ ?

>
> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
> ---
> drivers/media/platform/mtk-vcodec/Makefile | 5 +-
> .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 111 +++++++----
> .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 172 ++++++++++++++++++
> .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 51 ++++++
> .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 1 +
> .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 2 +
> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 19 ++
> 7 files changed, 329 insertions(+), 32 deletions(-)
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h
>
> diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
> index ca8e9e7a9c4e..c61bfb179bcc 100644
> --- a/drivers/media/platform/mtk-vcodec/Makefile
> +++ b/drivers/media/platform/mtk-vcodec/Makefile
> @@ -2,7 +2,8 @@
>
> obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec-dec.o \
> mtk-vcodec-enc.o \
> - mtk-vcodec-common.o
> + mtk-vcodec-common.o \
> + mtk-vcodec-dec-hw.o
>
> mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
> vdec/vdec_vp8_if.o \
> @@ -16,6 +17,8 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
> mtk_vcodec_dec_stateless.o \
> mtk_vcodec_dec_pm.o \
>
> +mtk-vcodec-dec-hw-y := mtk_vcodec_dec_hw.o
> +
> mtk-vcodec-enc-y := venc/venc_vp8_if.o \
> venc/venc_h264_if.o \
> mtk_vcodec_enc.o \
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> index b7a51e96d4ba..95fbe9be3f6d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> @@ -18,19 +18,40 @@
>
> #include "mtk_vcodec_drv.h"
> #include "mtk_vcodec_dec.h"
> +#include "mtk_vcodec_dec_hw.h"
> #include "mtk_vcodec_dec_pm.h"
> #include "mtk_vcodec_intr.h"
> #include "mtk_vcodec_util.h"
> #include "mtk_vcodec_fw.h"
>
> -#define VDEC_HW_ACTIVE 0x10
> -#define VDEC_IRQ_CFG 0x11
> -#define VDEC_IRQ_CLR 0x10
> -#define VDEC_IRQ_CFG_REG 0xa4
> -
> module_param(mtk_v4l2_dbg_level, int, 0644);
> module_param(mtk_vcodec_dbg, bool, 0644);
>
> +static int mtk_vcodec_subdev_device_check(struct mtk_vcodec_dev *vdec_dev)
> +{
> + struct platform_device *pdev = vdec_dev->plat_dev;
> + struct device_node *subdev_node;
> + enum mtk_vdec_hw_id hw_idx;
> + const struct of_device_id *of_id;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(mtk_vdec_hw_match); i++) {
> + of_id = &mtk_vdec_hw_match[i];
> + subdev_node = of_find_compatible_node(NULL, NULL,
> + of_id->compatible);
> + if (!subdev_node)
> + continue;
> +
> + hw_idx = (enum mtk_vdec_hw_id)(uintptr_t)of_id->data;
> + if (!test_bit(hw_idx, vdec_dev->subdev_bitmap)) {
> + dev_err(&pdev->dev, "Vdec %d is not ready", hw_idx);
> + return -EAGAIN;
> + }
> + }
> +
> + return 0;
> +}
> +
> static irqreturn_t mtk_vcodec_dec_irq_handler(int irq, void *priv)
> {
> struct mtk_vcodec_dev *dev = priv;
> @@ -95,6 +116,42 @@ static int mtk_vcodec_get_reg_bases(struct mtk_vcodec_dev *dev)
> return 0;
> }
>
> +static int mtk_vcodec_init_dec_resources(struct mtk_vcodec_dev *dev)
> +{
> + struct platform_device *pdev = dev->plat_dev;
> + int ret;
> +
> + ret = mtk_vcodec_get_reg_bases(dev);
> + if (ret)
> + return ret;
> +
> + if (dev->vdec_pdata->is_subdev_supported)
> + return 0;
> +
> + dev->dec_irq = platform_get_irq(pdev, 0);
> + if (dev->dec_irq < 0) {
> + dev_err(&pdev->dev, "failed to get irq number");
> + return dev->dec_irq;
> + }
> +
> + irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN);
> + ret = devm_request_irq(&pdev->dev, dev->dec_irq,
> + mtk_vcodec_dec_irq_handler, 0, pdev->name, dev);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to install dev->dec_irq %d (%d)",
> + dev->dec_irq, ret);
> + return ret;
> + }
> +
> + ret = mtk_vcodec_init_dec_pm(pdev, &dev->pm);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to get mt vcodec clock source");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static int fops_vcodec_open(struct file *file)
> {
> struct mtk_vcodec_dev *dev = video_drvdata(file);
> @@ -116,6 +173,12 @@ static int fops_vcodec_open(struct file *file)
> init_waitqueue_head(&ctx->queue);
> mutex_init(&ctx->lock);
>
> + ret = mtk_vcodec_subdev_device_check(dev);
> + if (ret) {
> + mtk_v4l2_err("Failed to check vdec comp device.");

basic question: what is "comp" device?

> + goto err_ctrls_setup;
> + }
> +
> ctx->type = MTK_INST_DECODER;
> ret = dev->vdec_pdata->ctrls_setup(ctx);
> if (ret) {
> @@ -220,7 +283,6 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
> {
> struct mtk_vcodec_dev *dev;
> struct video_device *vfd_dec;
> - struct resource *res;
> phandle rproc_phandle;
> enum mtk_vcodec_fw_type fw_type;
> int ret;
> @@ -249,32 +311,10 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
> if (IS_ERR(dev->fw_handler))
> return PTR_ERR(dev->fw_handler);
>
> - ret = mtk_vcodec_init_dec_pm(dev->plat_dev, &dev->pm);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "Failed to get mt vcodec clock source");
> - goto err_dec_pm;
> - }
> -
> - ret = mtk_vcodec_get_reg_bases(dev);
> - if (ret)
> - goto err_res;
> -
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> - if (res == NULL) {
> - dev_err(&pdev->dev, "failed to get irq resource");
> - ret = -ENOENT;
> - goto err_res;
> - }
> -
> - dev->dec_irq = platform_get_irq(pdev, 0);
> - irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN);
> - ret = devm_request_irq(&pdev->dev, dev->dec_irq,
> - mtk_vcodec_dec_irq_handler, 0, pdev->name, dev);
> + ret = mtk_vcodec_init_dec_resources(dev);
> if (ret) {
> - dev_err(&pdev->dev, "Failed to install dev->dec_irq %d (%d)",
> - dev->dec_irq,
> - ret);
> - goto err_res;
> + dev_err(&pdev->dev, "Failed to init dec resources");
> + goto err_dec_pm;
> }
>
> mutex_init(&dev->dec_mutex);
> @@ -329,6 +369,15 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
> goto err_event_workq;
> }
>
> + if (dev->vdec_pdata->is_subdev_supported) {
> + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL,
> + &pdev->dev);
> + if (ret) {
> + mtk_v4l2_err("Main device of_platform_populate failed.");
> + goto err_event_workq;
> + }
> + }
> +
> if (dev->vdec_pdata->uses_stateless_api) {
> dev->mdev_dec.dev = &pdev->dev;
> strscpy(dev->mdev_dec.model, MTK_VCODEC_DEC_NAME,
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c
> new file mode 100644
> index 000000000000..025a103008ba
> --- /dev/null
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c
> @@ -0,0 +1,172 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021 MediaTek Inc.
> + * Author: Yunfei Dong <yunfei.dong@mediatek.com>
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/slab.h>
> +
> +#include "mtk_vcodec_drv.h"
> +#include "mtk_vcodec_dec.h"
> +#include "mtk_vcodec_dec_hw.h"
> +#include "mtk_vcodec_dec_pm.h"
> +#include "mtk_vcodec_intr.h"
> +#include "mtk_vcodec_util.h"
> +
> +const struct of_device_id mtk_vdec_hw_match[] = {
> + {
> + .compatible = "mediatek,mtk-vcodec-lat",
> + .data = (void *)MTK_VDEC_LAT0,
> + },

Are we supposed to have LAT1 here as well?

> + {
> + .compatible = "mediatek,mtk-vcodec-core",
> + .data = (void *)MTK_VDEC_CORE,
> + },
> + {},
> +};
> +EXPORT_SYMBOL_GPL(mtk_vdec_hw_match);
> +
> +MODULE_DEVICE_TABLE(of, mtk_vdec_hw_match);
> +
> +static irqreturn_t mtk_vdec_hw_irq_handler(int irq, void *priv)
> +{
> + struct mtk_vdec_hw_dev *dev = priv;
> + struct mtk_vcodec_ctx *ctx;
> + u32 cg_status;
> + unsigned int dec_done_status;
> + void __iomem *vdec_misc_addr = dev->reg_base[VDEC_HW_MISC] +
> + VDEC_IRQ_CFG_REG;
> +
> + ctx = mtk_vcodec_get_curr_ctx(dev->main_dev);
> +
> + /* check if HW active or not */
> + cg_status = readl(dev->reg_base[VDEC_HW_SYS]);
> + if (cg_status & VDEC_HW_ACTIVE) {
> + mtk_v4l2_err("vdec active is not 0x0 (0x%08x)",
> + cg_status);
> + return IRQ_HANDLED;
> + }
> +
> + dec_done_status = readl(vdec_misc_addr);
> + if ((dec_done_status & MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) !=
> + MTK_VDEC_IRQ_STATUS_DEC_SUCCESS)
> + return IRQ_HANDLED;
> +
> + /* clear interrupt */
> + writel(dec_done_status | VDEC_IRQ_CFG, vdec_misc_addr);

Is VDEC_IRQ_CFG also intended for clear interrupt?

> + writel(dec_done_status & ~VDEC_IRQ_CLR, vdec_misc_addr);
> +
> + wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED);
> +
> + mtk_v4l2_debug(3, "wake up ctx %d, dec_done_status=%x",
> + ctx->id, dec_done_status);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int mtk_vdec_hw_init_irq(struct mtk_vdec_hw_dev *dev)
> +{
> + struct platform_device *pdev = dev->plat_dev;
> + int ret;
> +
> + dev->dec_irq = platform_get_irq(pdev, 0);
> + if (dev->dec_irq < 0) {
> + dev_err(&pdev->dev, "Failed to get irq resource");
> + return dev->dec_irq;
> + }
> +
> + irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN);
> + ret = devm_request_irq(&pdev->dev, dev->dec_irq,
> + mtk_vdec_hw_irq_handler, 0, pdev->name, dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to install dev->dec_irq %d (%d)",
> + dev->dec_irq, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_vdec_hw_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_vdec_hw_dev *subdev_dev;
> + struct mtk_vcodec_dev *main_dev;
> + const struct of_device_id *of_id;
> + int hw_idx;
> + int ret;
> +
> + if (!dev->parent) {
> + dev_err(dev, "no parent for hardware devices.\n");
> + return -ENODEV;
> + }
> +
> + main_dev = dev_get_drvdata(dev->parent);
> + if (!main_dev) {
> + dev_err(dev, "failed to get parent driver data");
> + return -EINVAL;
> + }
> +
> + subdev_dev = devm_kzalloc(dev, sizeof(*subdev_dev), GFP_KERNEL);
> + if (!subdev_dev)
> + return -ENOMEM;
> +
> + subdev_dev->plat_dev = pdev;
> + ret = mtk_vcodec_init_dec_pm(pdev, &subdev_dev->pm);
> + if (ret)
> + return ret;
> +
> + subdev_dev->reg_base[VDEC_HW_MISC] =
> + devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR((__force void *)subdev_dev->reg_base[VDEC_HW_MISC])) {
> + ret = PTR_ERR((__force void *)subdev_dev->reg_base[VDEC_HW_MISC]);
> + goto err;
> + }
> +
> + ret = mtk_vdec_hw_init_irq(subdev_dev);
> + if (ret)
> + goto err;
> +
> + of_id = of_match_device(mtk_vdec_hw_match, dev);
> + if (!of_id) {
> + dev_err(dev, "Can't get vdec subdev id.\n");
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + hw_idx = (enum mtk_vdec_hw_id)(uintptr_t)of_id->data;
> + if (hw_idx >= MTK_VDEC_HW_MAX) {
> + dev_err(dev, "Hardware index %d not correct.\n", hw_idx);
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + main_dev->subdev_dev[hw_idx] = subdev_dev;
> + subdev_dev->hw_idx = hw_idx;
> + subdev_dev->main_dev = main_dev;
> + subdev_dev->reg_base[VDEC_HW_SYS] = main_dev->reg_base[VDEC_HW_SYS];
> + set_bit(subdev_dev->hw_idx, main_dev->subdev_bitmap);
> +
> + platform_set_drvdata(pdev, subdev_dev);
> + return 0;
> +err:
> + mtk_vcodec_release_dec_pm(&subdev_dev->pm);
> + return ret;
> +}
> +
> +static struct platform_driver mtk_vdec_driver = {
> + .probe = mtk_vdec_hw_probe,
> + .driver = {
> + .name = "mtk-vdec-comp",
> + .of_match_table = mtk_vdec_hw_match,
> + },
> +};
> +module_platform_driver(mtk_vdec_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Mediatek video decoder hardware driver");
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h
> new file mode 100644
> index 000000000000..f7f36790629d
> --- /dev/null
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021 MediaTek Inc.
> + * Author: Yunfei Dong <yunfei.dong@mediatek.com>
> + */
> +
> +#ifndef _MTK_VCODEC_DEC_HW_H_
> +#define _MTK_VCODEC_DEC_HW_H_
> +
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +
> +#include "mtk_vcodec_drv.h"
> +
> +#define VDEC_HW_ACTIVE 0x10
> +#define VDEC_IRQ_CFG 0x11
> +#define VDEC_IRQ_CLR 0x10
> +#define VDEC_IRQ_CFG_REG 0xa4
> +
> +extern const struct of_device_id mtk_vdec_hw_match[MTK_VDEC_HW_MAX];
> +
> +/**
> + * enum mtk_vdec_hw_reg_idx - subdev hardware register base index
> + */
> +enum mtk_vdec_hw_reg_idx {
> + VDEC_HW_SYS,
> + VDEC_HW_MISC,
> + VDEC_HW_MAX
> +};
> +
> +/**
> + * struct mtk_vdec_hw_dev - vdec hardware driver data
> + * @plat_dev: platform device
> + * @main_dev: main device
> + * @reg_base: Mapped address of MTK Vcodec registers.
> + *
> + * @dec_irq: decoder irq resource
> + * @pm: power management control
> + * @hw_idx: each hardware index
> + */
> +struct mtk_vdec_hw_dev {
> + struct platform_device *plat_dev;
> + struct mtk_vcodec_dev *main_dev;
> + void __iomem *reg_base[VDEC_HW_MAX];
> +
> + int dec_irq;
> + struct mtk_vcodec_pm pm;
> + int hw_idx;
> +};
> +
> +#endif /* _MTK_VCODEC_DEC_HW_H_ */
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
> index bef49244e61b..c7f9259ad094 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
> @@ -625,4 +625,5 @@ const struct mtk_vcodec_dec_pdata mtk_vdec_8173_pdata = {
> .num_framesizes = NUM_SUPPORTED_FRAMESIZE,
> .worker = mtk_vdec_worker,
> .flush_decoder = mtk_vdec_flush_decoder,
> + .is_subdev_supported = false,
> };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> index 26e4d6f4ec04..2d285515b625 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> @@ -357,6 +357,7 @@ const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata = {

8173 might be only one for stateful. But we have multiple platforms
for 8183. Shouldn't this name reflect this?

> .uses_stateless_api = true,
> .worker = mtk_vdec_worker,
> .flush_decoder = mtk_vdec_flush_decoder,
> + .is_subdev_supported = false,
> };
>
> const struct mtk_vcodec_dec_pdata mtk_lat_sig_core_pdata = {
> @@ -373,4 +374,5 @@ const struct mtk_vcodec_dec_pdata mtk_lat_sig_core_pdata = {

Which platforms is this supposed to be used? Some comments on this
might be helpful.

> .uses_stateless_api = true,
> .worker = mtk_vdec_worker,
> .flush_decoder = mtk_vdec_flush_decoder,
> + .is_subdev_supported = true,
> };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index 0fa9d85114b9..2160f26263ef 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -93,6 +93,17 @@ enum mtk_fmt_type {
> MTK_FMT_FRAME = 2,
> };
>
> +/**
> + * struct mtk_vdec_hw_id - Hardware index used to separate
> + * different hardware
> + */
> +enum mtk_vdec_hw_id {
> + MTK_VDEC_CORE,
> + MTK_VDEC_LAT0,
> + MTK_VDEC_LAT1,
> + MTK_VDEC_HW_MAX,
> +};
> +
> /*
> * struct mtk_video_fmt - Structure used to store information about pixelformats
> */
> @@ -332,6 +343,7 @@ enum mtk_chip {
> *
> * @chip: chip this decoder is compatible with
> *
> + * @is_subdev_supported: whether support parent-node architecture(subdev)
> * @uses_stateless_api: whether the decoder uses the stateless API with requests
> */
>
> @@ -353,6 +365,7 @@ struct mtk_vcodec_dec_pdata {
>
> enum mtk_chip chip;
>
> + bool is_subdev_supported;
> bool uses_stateless_api;
> };
>
> @@ -423,6 +436,9 @@ struct mtk_vcodec_enc_pdata {
> * @pm: power management control
> * @dec_capability: used to identify decode capability, ex: 4k
> * @enc_capability: used to identify encode capability
> + *
> + * @subdev_dev: subdev hardware device
> + * @subdev_bitmap: used to record hardware is ready or not
> */
> struct mtk_vcodec_dev {
> struct v4l2_device v4l2_dev;
> @@ -460,6 +476,9 @@ struct mtk_vcodec_dev {
> struct mtk_vcodec_pm pm;
> unsigned int dec_capability;
> unsigned int enc_capability;
> +
> + void *subdev_dev[MTK_VDEC_HW_MAX];
> + DECLARE_BITMAP(subdev_bitmap, MTK_VDEC_HW_MAX);
> };
>
> static inline struct mtk_vcodec_ctx *fh_to_ctx(struct v4l2_fh *fh)
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-12-10 00:29    [W:0.162 / U:3.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site