lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 4/8] usb: dwc3: drd: Register the eud connector child node for dwc3
On Thu, Dec 02, 2021 at 03:21:23PM +0530, Souradeep Chowdhury wrote:
> Register the child node for dwc3 which is the "eud_usb_connector".
> The eud driver will be able to switch the usb role from device to
> host and vice versa using the role switch property of dwc3 node.
>
> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
> ---
> drivers/usb/dwc3/drd.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index d7f7683..b4ea55c 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -8,6 +8,7 @@
> */
>
> #include <linux/extcon.h>
> +#include <linux/of_platform.h>
> #include <linux/of_graph.h>
> #include <linux/platform_device.h>
> #include <linux/property.h>
> @@ -164,6 +165,27 @@ static int dwc3_otg_get_irq(struct dwc3 *dwc)
> return irq;
> }
>
> +static int dwc3_register_eud(struct dwc3 *dwc)
> +{
> + struct device *dev = dwc->dev;
> + struct device_node *np = dev->of_node;
> + int ret;
> +
> + of_get_child_by_name(np, "eud_usb_connector");

Connector nodes are named 'connector' or possibly 'usb-connector'. If
you are creating an ABI with the node name, it should be documented.
However, it's preferred to use 'compatible' for identifying nodes rather
than a node name.

> + if (!np) {
> + dev_dbg(dev, "no usb_connector child node specified\n");
> + return 0;
> + }
> +
> + ret = of_platform_populate(np, NULL, NULL, dev);

But why is any of this needed. The connector doesn't have a driver (I
expect eventually we will) and the EUD device is not a child.

> + if (ret) {
> + dev_err(dev, "failed to register usb_connector - %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> void dwc3_otg_init(struct dwc3 *dwc)
> {
> u32 reg;
> @@ -580,6 +602,10 @@ int dwc3_drd_init(struct dwc3 *dwc)
> ret = dwc3_setup_role_switch(dwc);
> if (ret < 0)
> return ret;
> +
> + ret = dwc3_register_eud(dwc);
> + if (ret < 0)
> + return ret;
> } else if (dwc->edev) {
> dwc->edev_nb.notifier_call = dwc3_drd_notifier;
> ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
> --
> 2.7.4
>
>

\
 
 \ /
  Last update: 2021-12-13 21:05    [W:0.105 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site