lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V2 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
On Thu, Dec 02, 2021 at 03:21:25PM +0530, Souradeep Chowdhury wrote:
> Add the Embedded USB Debugger(EUD) device tree node. The
> node contains EUD base register region and EUD mode
> manager register regions along with the interrupt entry.
> Also add the connector to EUD which is mapped as the child
> of dwc3. The connector is attached to EUD via port. Also add
> the role-switch property to dwc3 node.
>
> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 53a21d0..2d14e5c 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1315,6 +1315,18 @@
> phys = <&usb_2_hsphy>;
> phy-names = "usb2-phy";
> maximum-speed = "high-speed";
> + usb-role-switch;
> + usb_con: eud_usb_connector {
> + compatible = "qcom,usb-connector-eud",
> + "usb-c-connector";
> + ports {
> + port@0 {

It is already defined that port@0 of the connector is USB HS data. Is
that the case here? What about the SS lines?

From the description, it sounds like the data path is DWC3 -> EUD ->
connector. The DT structure doesn't match that.

> + usb2_role_switch: endpoint {
> + remote-endpoint = <&eud_ep>;
> + };
> + };
> + };
> + };
> };
> };
>
> @@ -1339,6 +1351,19 @@
> interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + eud: eud@88e0000 {
> + compatible = "qcom,sc7280-eud","qcom,eud";
> + reg = <0 0x88e0000 0 0x2000>,
> + <0 0x88e2000 0 0x1000>;
> + interrupt-parent = <&pdc>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> + port {
> + eud_ep: endpoint {
> + remote-endpoint = <&usb2_role_switch>;
> + };
> + };
> + };
> +
> nsp_noc: interconnect@a0c0000 {
> reg = <0 0x0a0c0000 0 0x10000>;
> compatible = "qcom,sc7280-nsp-noc";
> --
> 2.7.4
>
>

\
 
 \ /
  Last update: 2021-12-13 20:59    [W:0.113 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site