lkml.org 
[lkml]   [2021]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
Date
Add the Embedded USB Debugger(EUD) device tree node. The
node contains EUD base register region and EUD mode
manager register regions along with the interrupt entry.
Also add the connector to EUD which is mapped as the child
of dwc3. The connector is attached to EUD via port. Also add
the role-switch property to dwc3 node.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 53a21d0..2d14e5c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1315,6 +1315,18 @@
phys = <&usb_2_hsphy>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
+ usb-role-switch;
+ usb_con: eud_usb_connector {
+ compatible = "qcom,usb-connector-eud",
+ "usb-c-connector";
+ ports {
+ port@0 {
+ usb2_role_switch: endpoint {
+ remote-endpoint = <&eud_ep>;
+ };
+ };
+ };
+ };
};
};

@@ -1339,6 +1351,19 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};

+ eud: eud@88e0000 {
+ compatible = "qcom,sc7280-eud","qcom,eud";
+ reg = <0 0x88e0000 0 0x2000>,
+ <0 0x88e2000 0 0x1000>;
+ interrupt-parent = <&pdc>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ port {
+ eud_ep: endpoint {
+ remote-endpoint = <&usb2_role_switch>;
+ };
+ };
+ };
+
nsp_noc: interconnect@a0c0000 {
reg = <0 0x0a0c0000 0 0x10000>;
compatible = "qcom,sc7280-nsp-noc";
--
2.7.4
\
 
 \ /
  Last update: 2021-12-02 10:53    [W:0.124 / U:5.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site