lkml.org 
[lkml]   [2021]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v2 5/6] net: ocelot: add FDMA support
Date
On Wed, Nov 03, 2021 at 10:19:42AM +0100, Clément Léger wrote:
> Ethernet frames can be extracted or injected autonomously to or from the
> device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data
> structures in memory are used for injecting or extracting Ethernet frames.
> The FDMA generates interrupts when frame extraction or injection is done
> and when the linked lists need updating.
>
> The FDMA is shared between all the ethernet ports of the switch and uses
> a linked list of descriptors (DCB) to inject and extract packets.
> Before adding descriptors, the FDMA channels must be stopped. It would
> be inefficient to do that each time a descriptor would be added,
>
> TX path uses multiple lists to handle descriptors. tx_ongoing is the list
> of DCB currently owned by the hardware, tx_queued is a list of DCB that
> will be given to the hardware when tx_ongoing is done and finally
> tx_free_dcb is the list of DCB available for TX.
>
> RX path uses two list, rx_hw is the list of DCB currently given to the
> hardware and rx_sw is the list of descriptors that have been completed
> by the FDMA and will be reinjected when the DMA hits the end of the
> linked list.
>
> Co-developed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---

Honestly, my mind exploded when I saw locking between TX and TX
confirmation. Can you not constrain the list of TX DCBs to act like a
ring-based device? Meaning that the linked list is always constant in
size, and you just update the Linked List Pointer of the last entry
populated by software to be NULL, to make the hardware stop processing
beyond that point. This could help you avoid keeping a list in software,
and a DMA pool for the DCBs, just have a contiguous memory mapping of
all the DCBs for TX, and then you shouldn't need a spin_lock for a list
you no longer keep.

I haven't even gotten to reviewing RX properly...

> drivers/net/ethernet/mscc/Makefile | 1 +
> drivers/net/ethernet/mscc/ocelot.h | 1 +
> drivers/net/ethernet/mscc/ocelot_fdma.c | 693 +++++++++++++++++++++
> drivers/net/ethernet/mscc/ocelot_fdma.h | 59 ++
> drivers/net/ethernet/mscc/ocelot_net.c | 11 +-
> drivers/net/ethernet/mscc/ocelot_vsc7514.c | 15 +
> include/soc/mscc/ocelot.h | 2 +
> 7 files changed, 779 insertions(+), 3 deletions(-)
> create mode 100644 drivers/net/ethernet/mscc/ocelot_fdma.c
> create mode 100644 drivers/net/ethernet/mscc/ocelot_fdma.h
>
> diff --git a/drivers/net/ethernet/mscc/Makefile b/drivers/net/ethernet/mscc/Makefile
> index 722c27694b21..d76a9b78b6ca 100644
> --- a/drivers/net/ethernet/mscc/Makefile
> +++ b/drivers/net/ethernet/mscc/Makefile
> @@ -11,5 +11,6 @@ mscc_ocelot_switch_lib-y := \
> mscc_ocelot_switch_lib-$(CONFIG_BRIDGE_MRP) += ocelot_mrp.o
> obj-$(CONFIG_MSCC_OCELOT_SWITCH) += mscc_ocelot.o
> mscc_ocelot-y := \
> + ocelot_fdma.o \
> ocelot_vsc7514.o \
> ocelot_net.o
> diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
> index ba0dec7dd64f..ad85ad1079ad 100644
> --- a/drivers/net/ethernet/mscc/ocelot.h
> +++ b/drivers/net/ethernet/mscc/ocelot.h
> @@ -9,6 +9,7 @@
> #define _MSCC_OCELOT_H_
>
> #include <linux/bitops.h>
> +#include <linux/dsa/ocelot.h>
> #include <linux/etherdevice.h>
> #include <linux/if_vlan.h>
> #include <linux/net_tstamp.h>
> diff --git a/drivers/net/ethernet/mscc/ocelot_fdma.c b/drivers/net/ethernet/mscc/ocelot_fdma.c
> new file mode 100644
> index 000000000000..d8cdf022bbee
> --- /dev/null
> +++ b/drivers/net/ethernet/mscc/ocelot_fdma.c
> @@ -0,0 +1,693 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Microsemi SoCs FDMA driver
> + *
> + * Copyright (c) 2021 Microchip
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/dmapool.h>
> +#include <linux/dsa/ocelot.h>
> +#include <linux/netdevice.h>
> +#include <linux/of_platform.h>
> +#include <linux/skbuff.h>
> +
> +#include "ocelot_fdma.h"
> +#include "ocelot_qs.h"
> +
> +#define MSCC_FDMA_DCB_LLP(x) ((x) * 4 + 0x0)
> +
> +#define MSCC_FDMA_DCB_STAT_BLOCKO(x) (((x) << 20) & GENMASK(31, 20))
> +#define MSCC_FDMA_DCB_STAT_BLOCKO_M GENMASK(31, 20)
> +#define MSCC_FDMA_DCB_STAT_BLOCKO_X(x) (((x) & GENMASK(31, 20)) >> 20)
> +#define MSCC_FDMA_DCB_STAT_PD BIT(19)
> +#define MSCC_FDMA_DCB_STAT_ABORT BIT(18)
> +#define MSCC_FDMA_DCB_STAT_EOF BIT(17)
> +#define MSCC_FDMA_DCB_STAT_SOF BIT(16)
> +#define MSCC_FDMA_DCB_STAT_BLOCKL_M GENMASK(15, 0)
> +#define MSCC_FDMA_DCB_STAT_BLOCKL(x) ((x) & GENMASK(15, 0))
> +
> +#define MSCC_FDMA_CH_SAFE 0xcc
> +
> +#define MSCC_FDMA_CH_ACTIVATE 0xd0
> +
> +#define MSCC_FDMA_CH_DISABLE 0xd4
> +
> +#define MSCC_FDMA_EVT_ERR 0x164
> +
> +#define MSCC_FDMA_EVT_ERR_CODE 0x168
> +
> +#define MSCC_FDMA_INTR_LLP 0x16c
> +
> +#define MSCC_FDMA_INTR_LLP_ENA 0x170
> +
> +#define MSCC_FDMA_INTR_FRM 0x174
> +
> +#define MSCC_FDMA_INTR_FRM_ENA 0x178
> +
> +#define MSCC_FDMA_INTR_ENA 0x184
> +
> +#define MSCC_FDMA_INTR_IDENT 0x188
> +
> +#define MSCC_FDMA_INJ_CHAN 2
> +#define MSCC_FDMA_XTR_CHAN 0
> +
> +#define FDMA_MAX_SKB 256
> +#define FDMA_WEIGHT 32
> +
> +#define OCELOT_TAG_WORD_LEN (OCELOT_TAG_LEN / 4)
> +
> +/* Add 4 for possible misalignment when mapping the data */
> +#define FDMA_RX_EXTRA_SIZE \
> + (OCELOT_TAG_LEN + ETH_FCS_LEN + ETH_HLEN + 4)
> +
> +struct ocelot_fdma_dcb_hw_v2 {
> + u32 llp;
> + u32 datap;
> + u32 datal;
> + u32 stat;
> +};
> +
> +struct ocelot_fdma_dcb {
> + struct ocelot_fdma_dcb_hw_v2 hw;
> + struct list_head node;
> + struct sk_buff *skb;
> + dma_addr_t mapping;
> + size_t mapped_size;
> + dma_addr_t phys;
> +};
> +
> +static int fdma_rx_compute_buffer_size(int mtu)
> +{
> + return ALIGN(mtu + FDMA_RX_EXTRA_SIZE, 4);
> +}
> +
> +static void fdma_writel(struct ocelot_fdma *fdma, u32 reg, u32 data)
> +{
> + writel(data, fdma->base + reg);
> +}
> +
> +static u32 fdma_readl(struct ocelot_fdma *fdma, u32 reg)
> +{
> + return readl(fdma->base + reg);
> +}
> +
> +static void fdma_activate_chan(struct ocelot_fdma *fdma,
> + struct ocelot_fdma_dcb *dcb, int chan)
> +{
> + fdma_writel(fdma, MSCC_FDMA_DCB_LLP(chan), dcb->phys);
> + fdma_writel(fdma, MSCC_FDMA_CH_ACTIVATE, BIT(chan));
> +}
> +
> +static void fdma_stop_channel(struct ocelot_fdma *fdma, int chan)
> +{
> + u32 safe;
> +
> + fdma_writel(fdma, MSCC_FDMA_CH_DISABLE, BIT(chan));
> + do {
> + safe = fdma_readl(fdma, MSCC_FDMA_CH_SAFE);
> + } while (!(safe & BIT(chan)));
> +}
> +
> +static bool ocelot_fdma_dcb_set_data(struct ocelot_fdma *fdma,
> + struct ocelot_fdma_dcb *dcb, void *data,
> + size_t size, enum dma_data_direction dir)
> +{
> + u32 offset;
> +
> + dcb->mapped_size = size;
> + dcb->mapping = dma_map_single(fdma->dev, data, size, dir);
> + if (unlikely(dma_mapping_error(fdma->dev, dcb->mapping)))
> + return false;
> +
> + offset = dcb->mapping & 0x3;
> +
> + dcb->hw.llp = 0;
> + dcb->hw.datap = dcb->mapping & ~0x3;
> + /* DATAL must be a multiple of word size */
> + dcb->hw.datal = ALIGN_DOWN(size - offset, 4);
> + dcb->hw.stat = MSCC_FDMA_DCB_STAT_BLOCKO(offset);
> +
> + return true;
> +}
> +
> +static bool ocelot_fdma_dcb_set_rx_skb(struct ocelot_fdma *fdma,
> + struct ocelot_fdma_dcb *dcb,
> + struct sk_buff *skb, size_t size)
> +{
> + dcb->skb = skb;
> + return ocelot_fdma_dcb_set_data(fdma, dcb, skb->data, size,
> + DMA_FROM_DEVICE);
> +}
> +
> +static bool ocelot_fdma_dcb_set_tx_skb(struct ocelot_fdma *fdma,
> + struct ocelot_fdma_dcb *dcb,
> + struct sk_buff *skb)
> +{
> + if (!ocelot_fdma_dcb_set_data(fdma, dcb, skb->data, skb->len,
> + DMA_TO_DEVICE))
> + return false;
> +
> + dcb->skb = skb;
> + dcb->hw.stat |= MSCC_FDMA_DCB_STAT_BLOCKL(skb->len);
> + dcb->hw.stat |= MSCC_FDMA_DCB_STAT_SOF | MSCC_FDMA_DCB_STAT_EOF;
> +
> + return true;
> +}
> +
> +static struct ocelot_fdma_dcb *fdma_dcb_alloc(struct ocelot_fdma *fdma)
> +{
> + struct ocelot_fdma_dcb *dcb;
> + dma_addr_t phys;
> +
> + dcb = dma_pool_zalloc(fdma->dcb_pool, GFP_KERNEL, &phys);
> + if (unlikely(!dcb))
> + return NULL;
> +
> + dcb->phys = phys;
> +
> + return dcb;
> +}
> +
> +static struct net_device *fdma_get_port_netdev(struct ocelot_fdma *fdma,
> + int port_num)
> +{
> + struct ocelot_port_private *port_priv;
> + struct ocelot *ocelot = fdma->ocelot;
> + struct ocelot_port *port;
> +
> + if (port_num >= ocelot->num_phys_ports)
> + return NULL;
> +
> + port = ocelot->ports[port_num];
> +
> + if (!port)
> + return NULL;
> +
> + port_priv = container_of(port, struct ocelot_port_private, port);
> +
> + return port_priv->dev;
> +}
> +
> +static bool ocelot_fdma_rx_process_skb(struct ocelot_fdma *fdma,
> + struct ocelot_fdma_dcb *dcb,
> + int budget)
> +{
> + struct sk_buff *skb = dcb->skb;
> + struct net_device *ndev;
> + u64 src_port;
> + void *xfh;
> +
> + dma_unmap_single(fdma->dev, dcb->mapping, dcb->mapped_size,
> + DMA_FROM_DEVICE);
> +
> + xfh = skb->data;
> + ocelot_xfh_get_src_port(xfh, &src_port);
> +
> + skb_put(skb, MSCC_FDMA_DCB_STAT_BLOCKL(dcb->hw.stat));
> + skb_pull(skb, OCELOT_TAG_LEN);
> +
> + ndev = fdma_get_port_netdev(fdma, src_port);
> + if (unlikely(!ndev)) {
> + napi_consume_skb(dcb->skb, budget);
> + return false;
> + }
> +
> + skb->dev = ndev;
> + skb->protocol = eth_type_trans(skb, skb->dev);
> + skb->dev->stats.rx_bytes += skb->len;
> + skb->dev->stats.rx_packets++;
> +
> + netif_receive_skb(skb);
> +
> + return true;
> +}
> +
> +static void ocelot_fdma_rx_refill(struct ocelot_fdma *fdma)
> +{
> + struct ocelot_fdma_dcb *dcb, *last_dcb;
> +
> + WARN_ON(list_empty(&fdma->rx_sw));
> +
> + dcb = list_first_entry(&fdma->rx_sw, struct ocelot_fdma_dcb, node);
> + /* Splice old hardware DCB list + new one */
> + if (!list_empty(&fdma->rx_hw)) {
> + last_dcb = list_last_entry(&fdma->rx_hw, struct ocelot_fdma_dcb,
> + node);
> + last_dcb->hw.llp = dcb->phys;
> + }
> +
> + /* Move software list to hardware list */
> + list_splice_tail_init(&fdma->rx_sw, &fdma->rx_hw);
> +
> + /* Finally reactivate the channel */
> + fdma_activate_chan(fdma, dcb, MSCC_FDMA_XTR_CHAN);
> +}
> +
> +static void ocelot_fdma_list_add_dcb(struct list_head *list,
> + struct ocelot_fdma_dcb *dcb)
> +{
> + struct ocelot_fdma_dcb *last_dcb;
> +
> + if (!list_empty(list)) {
> + last_dcb = list_last_entry(list, struct ocelot_fdma_dcb, node);
> + last_dcb->hw.llp = dcb->phys;
> + }
> +
> + list_add_tail(&dcb->node, list);
> +}
> +
> +static bool ocelot_fdma_rx_add_dcb_sw(struct ocelot_fdma *fdma,
> + struct ocelot_fdma_dcb *dcb)
> +{
> + struct sk_buff *new_skb;
> +
> + /* Add DCB to end of list with new SKB */
> + new_skb = napi_alloc_skb(&fdma->napi, fdma->rx_buf_size);
> + if (unlikely(!new_skb)) {
> + pr_err("skb_alloc failed\n");
> + return false;
> + }
> +
> + ocelot_fdma_dcb_set_rx_skb(fdma, dcb, new_skb, fdma->rx_buf_size);
> + ocelot_fdma_list_add_dcb(&fdma->rx_sw, dcb);
> +
> + return true;
> +}
> +
> +static bool ocelot_fdma_rx_get(struct ocelot_fdma *fdma, int budget)
> +{
> + struct ocelot_fdma_dcb *dcb;
> + bool valid = true;
> + u32 stat;
> +
> + dcb = list_first_entry_or_null(&fdma->rx_hw, struct ocelot_fdma_dcb,
> + node);
> + if (!dcb || MSCC_FDMA_DCB_STAT_BLOCKL(dcb->hw.stat) == 0)
> + return false;
> +
> + list_del(&dcb->node);
> +
> + stat = dcb->hw.stat;
> + if (stat & MSCC_FDMA_DCB_STAT_ABORT || stat & MSCC_FDMA_DCB_STAT_PD)
> + valid = false;
> +
> + if (!(stat & MSCC_FDMA_DCB_STAT_SOF) ||
> + !(stat & MSCC_FDMA_DCB_STAT_EOF))
> + valid = false;
> +
> + if (likely(valid)) {
> + if (!ocelot_fdma_rx_process_skb(fdma, dcb, budget))
> + pr_err("Process skb failed, stat %x\n", stat);
> + } else {
> + napi_consume_skb(dcb->skb, budget);
> + }
> +
> + return ocelot_fdma_rx_add_dcb_sw(fdma, dcb);
> +}
> +
> +static void ocelot_fdma_rx_check_stopped(struct ocelot_fdma *fdma)
> +{
> + u32 llp = fdma_readl(fdma, MSCC_FDMA_DCB_LLP(MSCC_FDMA_XTR_CHAN));
> + /* LLP is non NULL, FDMA is still fetching packets */
> + if (llp)
> + return;
> +
> + fdma_stop_channel(fdma, MSCC_FDMA_XTR_CHAN);
> + ocelot_fdma_rx_refill(fdma);
> +}
> +
> +static void ocelot_fdma_tx_free_dcb(struct ocelot_fdma *fdma,
> + struct list_head *list)
> +{
> + struct ocelot_fdma_dcb *dcb;
> +
> + if (list_empty(list))
> + return;
> +
> + /* Free all SKBs that have been used for TX */
> + list_for_each_entry(dcb, list, node) {
> + dma_unmap_single(fdma->dev, dcb->mapping, dcb->mapped_size,
> + DMA_TO_DEVICE);
> + dev_consume_skb_any(dcb->skb);
> + dcb->skb = NULL;
> + }
> +
> + /* All DCBs can now be given to free list */
> + spin_lock(&fdma->tx_free_lock);
> + list_splice_tail_init(list, &fdma->tx_free_dcb);
> + spin_unlock(&fdma->tx_free_lock);
> +}
> +
> +static void ocelot_fdma_tx_cleanup(struct ocelot_fdma *fdma)
> +{
> + struct list_head tx_done = LIST_HEAD_INIT(tx_done);
> + struct ocelot_fdma_dcb *dcb, *temp;
> +
> + spin_lock(&fdma->tx_enqueue_lock);
> + if (list_empty(&fdma->tx_ongoing))
> + goto out_unlock;
> +
> + list_for_each_entry_safe(dcb, temp, &fdma->tx_ongoing, node) {
> + if (!(dcb->hw.stat & MSCC_FDMA_DCB_STAT_PD))
> + break;
> +
> + list_move_tail(&dcb->node, &tx_done);
> + }
> +
> +out_unlock:
> + spin_unlock(&fdma->tx_enqueue_lock);
> +
> + ocelot_fdma_tx_free_dcb(fdma, &tx_done);
> +}
> +
> +static void ocelot_fdma_tx_restart(struct ocelot_fdma *fdma)
> +{
> + struct ocelot_fdma_dcb *dcb;
> + u32 safe;
> +
> + spin_lock(&fdma->tx_enqueue_lock);
> +
> + if (!list_empty(&fdma->tx_ongoing) || list_empty(&fdma->tx_queued))
> + goto out_unlock;
> +
> + /* Ongoing list is empty, channel should be in safe mode */
> + do {
> + safe = fdma_readl(fdma, MSCC_FDMA_CH_SAFE);
> + } while (!(safe & BIT(MSCC_FDMA_INJ_CHAN)));
> +
> + /* Move queued DCB to ongoing and restart the DMA */
> + list_splice_tail_init(&fdma->tx_queued, &fdma->tx_ongoing);
> + /* List can't be empty, no need to check */
> + dcb = list_first_entry(&fdma->tx_ongoing, struct ocelot_fdma_dcb, node);
> +
> + fdma_activate_chan(fdma, dcb, MSCC_FDMA_INJ_CHAN);
> +
> +out_unlock:
> + spin_unlock(&fdma->tx_enqueue_lock);
> +}
> +
> +static int ocelot_fdma_napi_poll(struct napi_struct *napi, int budget)
> +{
> + struct ocelot_fdma *fdma = container_of(napi, struct ocelot_fdma, napi);
> + int work_done = 0;
> +
> + ocelot_fdma_tx_cleanup(fdma);
> + ocelot_fdma_tx_restart(fdma);
> +
> + while (work_done < budget) {
> + if (!ocelot_fdma_rx_get(fdma, budget))
> + break;
> +
> + work_done++;
> + }
> +
> + ocelot_fdma_rx_check_stopped(fdma);
> +
> + if (work_done < budget) {
> + napi_complete(&fdma->napi);

Documentation says you should consider calling napi_complete_done(&fdma->napi, work_done);

> + fdma_writel(fdma, MSCC_FDMA_INTR_ENA,
> + BIT(MSCC_FDMA_INJ_CHAN) | BIT(MSCC_FDMA_XTR_CHAN));
> + }
> +
> + return work_done;
> +}
> +
> +static irqreturn_t ocelot_fdma_interrupt(int irq, void *dev_id)
> +{
> + u32 ident, llp, frm, err, err_code;
> + struct ocelot_fdma *fdma = dev_id;
> +
> + ident = fdma_readl(fdma, MSCC_FDMA_INTR_IDENT);
> + frm = fdma_readl(fdma, MSCC_FDMA_INTR_FRM);
> + llp = fdma_readl(fdma, MSCC_FDMA_INTR_LLP);
> +
> + fdma_writel(fdma, MSCC_FDMA_INTR_LLP, llp & ident);
> + fdma_writel(fdma, MSCC_FDMA_INTR_FRM, frm & ident);
> + if (frm | llp) {

Bitwise OR? Strange.

> + fdma_writel(fdma, MSCC_FDMA_INTR_ENA, 0);
> + napi_schedule(&fdma->napi);
> + }
> +
> + err = fdma_readl(fdma, MSCC_FDMA_EVT_ERR);
> + if (unlikely(err)) {
> + err_code = fdma_readl(fdma, MSCC_FDMA_EVT_ERR_CODE);
> + dev_err_ratelimited(fdma->dev,
> + "Error ! chans mask: %#x, code: %#x\n",
> + err, err_code);
> +
> + fdma_writel(fdma, MSCC_FDMA_EVT_ERR, err);
> + fdma_writel(fdma, MSCC_FDMA_EVT_ERR_CODE, err_code);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static struct ocelot_fdma_dcb *fdma_tx_get_dcb(struct ocelot_fdma *fdma)

Please name these functions consistently and make them start with ocelot_.

> +{
> + struct ocelot_fdma_dcb *dcb = NULL;
> +
> + spin_lock_bh(&fdma->tx_free_lock);
> + dcb = list_first_entry_or_null(&fdma->tx_free_dcb,
> + struct ocelot_fdma_dcb, node);
> + if (dcb)
> + list_del(&dcb->node);
> +
> + spin_unlock_bh(&fdma->tx_free_lock);
> +
> + return dcb;
> +}
> +
> +int ocelot_fdma_inject_frame(struct ocelot_fdma *fdma, int port, u32 rew_op,
> + struct sk_buff *skb, struct net_device *dev)
> +{
> + struct ocelot_port *port_s = fdma->ocelot->ports[port];
> + struct ocelot_fdma_dcb *dcb;
> + struct sk_buff *new_skb;
> + void *ifh;
> +
> + if (unlikely(skb_shinfo(skb)->nr_frags != 0)) {
> + netdev_err(dev, "Unsupported fragmented packet");
> + dev_kfree_skb_any(skb);

skb_linearize()

Also please don't print stuff from the hot path without net_ratelimited()

> + return NETDEV_TX_OK;
> + }
> +
> + if (skb_headroom(skb) < OCELOT_TAG_LEN ||
> + skb_tailroom(skb) < ETH_FCS_LEN) {

Don't you also need to copy the skb (to ensure it's writable) if it's cloned
(like would be the case for packets with two-step PTP TX timestamping)?
I don't see any calls to skb_unshare().

You can test with:

ptp4l -i swp0 -2 -P -m --tx_timestamp_timeout 20

on two back-to-back boards.

> + new_skb = skb_copy_expand(skb, OCELOT_TAG_LEN, ETH_FCS_LEN,
> + GFP_ATOMIC);
> + dev_consume_skb_any(skb);

I think you can use pskb_expand_head() and avoid creating a new_skb.
Look at dsa_realloc_skb().

> + if (!new_skb)
> + return NETDEV_TX_OK;
> +
> + skb = new_skb;
> + }
> +
> + ifh = skb_push(skb, OCELOT_TAG_LEN);
> + skb_put(skb, ETH_FCS_LEN);
> + ocelot_ifh_port_set(ifh, port_s, rew_op, skb_vlan_tag_get(skb));
> +
> + dcb = fdma_tx_get_dcb(fdma);
> + if (unlikely(!dcb))
> + return NETDEV_TX_BUSY;
> +
> + if (!ocelot_fdma_dcb_set_tx_skb(fdma, dcb, skb)) {
> + dev_kfree_skb_any(skb);
> + spin_lock_bh(&fdma->tx_free_lock);
> + list_add_tail(&dcb->node, &fdma->tx_free_dcb);
> + spin_unlock_bh(&fdma->tx_free_lock);
> + return NETDEV_TX_OK;
> + }
> +
> + spin_lock_bh(&fdma->tx_enqueue_lock);
> +
> + if (list_empty(&fdma->tx_ongoing)) {
> + ocelot_fdma_list_add_dcb(&fdma->tx_ongoing, dcb);
> + fdma_activate_chan(fdma, dcb, MSCC_FDMA_INJ_CHAN);
> + } else {
> + ocelot_fdma_list_add_dcb(&fdma->tx_queued, dcb);
> + }
> +
> + spin_unlock_bh(&fdma->tx_enqueue_lock);

I think you don't need _bh locking from ndo_start_xmit() context.
__dev_queue_xmit() calls rcu_read_lock_bh(). On the other hand, I think
you might need to use spin_lock_bh from ocelot_fdma_napi_poll(), since
that runs from NET_RX softirq, and ndo_start_xmit() can run from loads
of other contexts.

> + return NETDEV_TX_OK;
> +}
> +
> +static void fdma_free_skbs_list(struct ocelot_fdma *fdma,
> + struct list_head *list,
> + enum dma_data_direction dir)
> +{
> + struct ocelot_fdma_dcb *dcb;
> +
> + if (list_empty(list))
> + return;

I'm not sure this is really needed.

> +
> + list_for_each_entry(dcb, list, node) {
> + if (dcb->skb) {
> + dma_unmap_single(fdma->dev, dcb->mapping,
> + dcb->mapped_size, dir);
> + dev_kfree_skb_any(dcb->skb);

dcb->skb = NULL?

> + }
> + }
> +}
> +
> +static int fdma_init_tx(struct ocelot_fdma *fdma)
> +{
> + int i;
> + struct ocelot_fdma_dcb *dcb;
> +
> + for (i = 0; i < FDMA_MAX_SKB; i++) {
> + dcb = fdma_dcb_alloc(fdma);
> + if (!dcb)
> + return -ENOMEM;
> +
> + list_add_tail(&dcb->node, &fdma->tx_free_dcb);
> + }
> +
> + return 0;
> +}
> +
> +static int fdma_init_rx(struct ocelot_fdma *fdma)
> +{
> + struct ocelot_port_private *port_priv;
> + struct ocelot *ocelot = fdma->ocelot;
> + struct ocelot_fdma_dcb *dcb;
> + struct ocelot_port *port;
> + struct net_device *ndev;
> + int max_mtu = 0;
> + int i;
> + u8 port_num;

Please declare variables in the order of descending line length (aka
"reverse Christmas tree"). Here, and in fdma_init_rx(), and in other
places.

> +
> + for (port_num = 0; port_num < ocelot->num_phys_ports; port_num++) {

The naming convention is "int port", "struct ocelot_port *ocelot_port".
Please keep it. Thanks.

> + port = ocelot->ports[port_num];
> + if (!port)
> + continue;
> +
> + port_priv = container_of(port, struct ocelot_port_private,
> + port);
> + ndev = port_priv->dev;
> +
> + ndev->needed_headroom = OCELOT_TAG_LEN;
> + ndev->needed_tailroom = ETH_FCS_LEN;
> +
> + if (READ_ONCE(ndev->mtu) > max_mtu)
> + max_mtu = READ_ONCE(ndev->mtu);

This seems silly, you use READ_ONCE twice... what's the point?
Also, what is this racing with?

> + }
> +
> + if (!ndev)
> + return -ENODEV;
> +
> + fdma->rx_buf_size = fdma_rx_compute_buffer_size(max_mtu);
> + netif_napi_add(ndev, &fdma->napi, ocelot_fdma_napi_poll,
> + FDMA_WEIGHT);
> +
> + for (i = 0; i < FDMA_MAX_SKB; i++) {
> + dcb = fdma_dcb_alloc(fdma);
> + if (!dcb)
> + return -ENOMEM;
> +
> + ocelot_fdma_rx_add_dcb_sw(fdma, dcb);
> + }
> +
> + napi_enable(&fdma->napi);
> +
> + return 0;
> +}
> +
> +struct ocelot_fdma *ocelot_fdma_init(struct platform_device *pdev,
> + struct ocelot *ocelot)
> +{
> + struct ocelot_fdma *fdma;
> + int ret;
> +
> + fdma = devm_kzalloc(&pdev->dev, sizeof(*fdma), GFP_KERNEL);
> + if (!fdma)
> + return ERR_PTR(-ENOMEM);
> +
> + fdma->ocelot = ocelot;
> + fdma->base = devm_platform_ioremap_resource_byname(pdev, "fdma");

Don't you want to look up the resource by name before allocating stuff?
Maybe the allocation won't be needed, then you'll have to live with it,
since you use devres. Although my personal recommendation would be to
just not use devres, it makes you think more.

> + if (IS_ERR_OR_NULL(fdma->base))
> + return fdma->base;

Just return NULL and simplify the caller, you aren't using the ERR value
anyway (or do something with the error value at the call site).

> +
> + fdma->dev = &pdev->dev;
> + fdma->dev->coherent_dma_mask = DMA_BIT_MASK(32);
> +
> + spin_lock_init(&fdma->tx_enqueue_lock);
> + spin_lock_init(&fdma->tx_free_lock);
> +
> + fdma_writel(fdma, MSCC_FDMA_INTR_ENA, 0);
> +
> + fdma->irq = platform_get_irq_byname(pdev, "fdma");
> + ret = devm_request_irq(&pdev->dev, fdma->irq, ocelot_fdma_interrupt, 0,
> + dev_name(&pdev->dev), fdma);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + /* Create a pool of consistent memory blocks for hardware descriptors */
> + fdma->dcb_pool = dmam_pool_create("ocelot_fdma", &pdev->dev,
> + sizeof(struct ocelot_fdma_dcb),
> + __alignof__(struct ocelot_fdma_dcb),
> + 0);
> + if (!fdma->dcb_pool) {
> + dev_err(&pdev->dev, "unable to allocate DMA descriptor pool\n");
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + INIT_LIST_HEAD(&fdma->tx_ongoing);
> + INIT_LIST_HEAD(&fdma->tx_free_dcb);
> + INIT_LIST_HEAD(&fdma->tx_queued);
> + INIT_LIST_HEAD(&fdma->rx_sw);
> + INIT_LIST_HEAD(&fdma->rx_hw);
> +
> + return fdma;
> +}
> +
> +int ocelot_fdma_start(struct ocelot_fdma *fdma)
> +{
> + struct ocelot *ocelot = fdma->ocelot;
> + int ret;
> +
> + ret = fdma_init_tx(fdma);
> + if (ret)
> + return ret;
> +
> + ret = fdma_init_rx(fdma);
> + if (ret)

Don't you want to undo the fdma_dcb_alloc() from fdma_init_tx() if this fails?

> + return ret;
> +
> + /* Reconfigure for extraction and injection using DMA */
> + ocelot_write_rix(ocelot, QS_INJ_GRP_CFG_MODE(2), QS_INJ_GRP_CFG, 0);
> + ocelot_write_rix(ocelot, QS_INJ_CTRL_GAP_SIZE(0), QS_INJ_CTRL, 0);
> +
> + ocelot_write_rix(ocelot, QS_XTR_GRP_CFG_MODE(2), QS_XTR_GRP_CFG, 0);
> +
> + fdma_writel(fdma, MSCC_FDMA_INTR_LLP, 0xffffffff);
> + fdma_writel(fdma, MSCC_FDMA_INTR_FRM, 0xffffffff);
> +
> + fdma_writel(fdma, MSCC_FDMA_INTR_LLP_ENA,
> + BIT(MSCC_FDMA_INJ_CHAN) | BIT(MSCC_FDMA_XTR_CHAN));
> + fdma_writel(fdma, MSCC_FDMA_INTR_FRM_ENA, BIT(MSCC_FDMA_XTR_CHAN));
> + fdma_writel(fdma, MSCC_FDMA_INTR_ENA,
> + BIT(MSCC_FDMA_INJ_CHAN) | BIT(MSCC_FDMA_XTR_CHAN));
> +
> + ocelot_fdma_rx_refill(fdma);
> +
> + return 0;
> +}
> +
> +int ocelot_fdma_stop(struct ocelot_fdma *fdma)
> +{
> + fdma_writel(fdma, MSCC_FDMA_INTR_ENA, 0);
> +
> + fdma_stop_channel(fdma, MSCC_FDMA_XTR_CHAN);
> + fdma_stop_channel(fdma, MSCC_FDMA_INJ_CHAN);
> +
> + /* Free potentially pending SKBs in DCB lists */
> + fdma_free_skbs_list(fdma, &fdma->rx_hw, DMA_FROM_DEVICE);
> + fdma_free_skbs_list(fdma, &fdma->rx_sw, DMA_FROM_DEVICE);
> + fdma_free_skbs_list(fdma, &fdma->tx_ongoing, DMA_TO_DEVICE);
> + fdma_free_skbs_list(fdma, &fdma->tx_queued, DMA_TO_DEVICE);
> +
> + netif_napi_del(&fdma->napi);
> +
> + return 0;
> +}
> diff --git a/drivers/net/ethernet/mscc/ocelot_fdma.h b/drivers/net/ethernet/mscc/ocelot_fdma.h
> new file mode 100644
> index 000000000000..6c5c5872abf5
> --- /dev/null
> +++ b/drivers/net/ethernet/mscc/ocelot_fdma.h
> @@ -0,0 +1,59 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Microsemi SoCs FDMA driver
> + *
> + * Copyright (c) 2021 Microchip
> + */
> +#ifndef _MSCC_OCELOT_FDMA_H_
> +#define _MSCC_OCELOT_FDMA_H_
> +
> +#include "ocelot.h"
> +
> +/**
> + * struct ocelot_fdma - FMDA struct
> + *
> + * @ocelot: Pointer to ocelot struct
> + * @base: base address of FDMA registers
> + * @dcb_pool: Pool used for DCB allocation
> + * @irq: FDMA interrupt
> + * @dev: Ocelot device
> + * @napi: napi handle
> + * @rx_buf_size: Size of RX buffer
> + * @tx_ongoing: List of DCB handed out to the FDMA
> + * @tx_queued: pending list of DCBs to be given to the hardware
> + * @tx_enqueue_lock: Lock used for tx_queued and tx_ongoing
> + * @tx_free_dcb: List of DCB available for TX
> + * @tx_free_lock: Lock used to access tx_free_dcb list
> + * @rx_hw: RX DCBs currently owned by the hardware and not completed
> + * @rx_sw: RX DCBs completed
> + */
> +struct ocelot_fdma {
> + struct ocelot *ocelot;
> + void __iomem *base;
> + struct dma_pool *dcb_pool;
> + int irq;
> + struct device *dev;
> + struct napi_struct napi;
> + size_t rx_buf_size;
> +
> + struct list_head tx_ongoing;
> + struct list_head tx_queued;
> + /* Lock for tx_queued and tx_ongoing lists */
> + spinlock_t tx_enqueue_lock;
> +
> + struct list_head tx_free_dcb;
> + /* Lock for tx_free_dcb list */
> + spinlock_t tx_free_lock;
> +
> + struct list_head rx_hw;
> + struct list_head rx_sw;
> +};
> +
> +struct ocelot_fdma *ocelot_fdma_init(struct platform_device *pdev,
> + struct ocelot *ocelot);
> +int ocelot_fdma_start(struct ocelot_fdma *fdma);
> +int ocelot_fdma_stop(struct ocelot_fdma *fdma);
> +int ocelot_fdma_inject_frame(struct ocelot_fdma *fdma, int port, u32 rew_op,
> + struct sk_buff *skb, struct net_device *dev);
> +
> +#endif
> diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c
> index 5916492fd6d0..3971b810c5b4 100644
> --- a/drivers/net/ethernet/mscc/ocelot_net.c
> +++ b/drivers/net/ethernet/mscc/ocelot_net.c
> @@ -15,6 +15,7 @@
> #include <net/pkt_cls.h>
> #include "ocelot.h"
> #include "ocelot_vcap.h"
> +#include "ocelot_fdma.h"
>
> #define OCELOT_MAC_QUIRKS OCELOT_QUIRK_QSGMII_PORTS_MUST_BE_UP
>
> @@ -457,7 +458,7 @@ static netdev_tx_t ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
> int port = priv->chip_port;
> u32 rew_op = 0;
>
> - if (!ocelot_can_inject(ocelot, 0))
> + if (!ocelot->fdma && !ocelot_can_inject(ocelot, 0))
> return NETDEV_TX_BUSY;
>
> /* Check if timestamping is needed */
> @@ -475,9 +476,13 @@ static netdev_tx_t ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
> rew_op = ocelot_ptp_rew_op(skb);
> }
>
> - ocelot_port_inject_frame(ocelot, port, 0, rew_op, skb);
> + if (ocelot->fdma) {
> + ocelot_fdma_inject_frame(ocelot->fdma, port, rew_op, skb, dev);
> + } else {
> + ocelot_port_inject_frame(ocelot, port, 0, rew_op, skb);
>
> - kfree_skb(skb);
> + kfree_skb(skb);

I know this is unrelated, but.. consume_skb maybe?

> + }
>
> return NETDEV_TX_OK;
> }
> diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
> index 38103b0255b0..985d584db3a1 100644
> --- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
> +++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
> @@ -18,6 +18,7 @@
>
> #include <soc/mscc/ocelot_vcap.h>
> #include <soc/mscc/ocelot_hsio.h>
> +#include "ocelot_fdma.h"
> #include "ocelot.h"
>
> static const u32 ocelot_ana_regmap[] = {
> @@ -1080,6 +1081,10 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
> ocelot->targets[io_target[i].id] = target;
> }
>
> + ocelot->fdma = ocelot_fdma_init(pdev, ocelot);
> + if (IS_ERR(ocelot->fdma))
> + ocelot->fdma = NULL;
> +
> hsio = syscon_regmap_lookup_by_compatible("mscc,ocelot-hsio");
> if (IS_ERR(hsio)) {
> dev_err(&pdev->dev, "missing hsio syscon\n");
> @@ -1139,6 +1144,12 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
> if (err)
> goto out_ocelot_devlink_unregister;
>
> + if (ocelot->fdma) {
> + err = ocelot_fdma_start(ocelot->fdma);
> + if (err)
> + goto out_ocelot_devlink_unregister;
> + }
> +
> err = ocelot_devlink_sb_register(ocelot);
> if (err)
> goto out_ocelot_release_ports;
> @@ -1166,6 +1177,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
> out_ocelot_release_ports:
> mscc_ocelot_release_ports(ocelot);
> mscc_ocelot_teardown_devlink_ports(ocelot);
> + if (ocelot->fdma)
> + ocelot_fdma_stop(ocelot->fdma);
> out_ocelot_devlink_unregister:
> ocelot_deinit(ocelot);
> out_put_ports:
> @@ -1179,6 +1192,8 @@ static int mscc_ocelot_remove(struct platform_device *pdev)
> {
> struct ocelot *ocelot = platform_get_drvdata(pdev);
>
> + if (ocelot->fdma)
> + ocelot_fdma_stop(ocelot->fdma);

Are you sure you want to call netif_napi_del() while the net devices are
still registered? :-/

> devlink_unregister(ocelot->devlink);
> ocelot_deinit_timestamp(ocelot);
> ocelot_devlink_sb_unregister(ocelot);
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index b3381c90ff3e..33e1559bdea3 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -695,6 +695,8 @@ struct ocelot {
> /* Protects the PTP clock */
> spinlock_t ptp_clock_lock;
> struct ptp_pin_desc ptp_pins[OCELOT_PTP_PINS_NUM];
> +
> + struct ocelot_fdma *fdma;
> };
>
> struct ocelot_policer {
> --
> 2.33.0
>
\
 
 \ /
  Last update: 2021-11-03 13:33    [W:0.281 / U:1.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site