lkml.org 
[lkml]   [2021]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/6] dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml
On Wed, Nov 03, 2021 at 10:19:39AM +0100, Clément Léger wrote:
> Convert existing bindings to yaml format. In the same time, remove non
> exiting properties ("inj" interrupt) and add fdma.
>
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---
> .../bindings/net/mscc,vsc7514-switch.yaml | 184 ++++++++++++++++++
> .../devicetree/bindings/net/mscc-ocelot.txt | 83 --------
> 2 files changed, 184 insertions(+), 83 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt
>
> diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> new file mode 100644
> index 000000000000..0c96eabf9d2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> @@ -0,0 +1,184 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip VSC7514 Ethernet switch controller
> +
> +maintainers:
> + - Vladimir Oltean <vladimir.oltean@nxp.com>
> + - Claudiu Manoil <claudiu.manoil@nxp.com>
> + - Alexandre Belloni <alexandre.belloni@bootlin.com>
> +
> +description: |
> + The VSC7514 Industrial IoT Ethernet switch contains four integrated dual media
> + 10/100/1000BASE-T PHYs, two 1G SGMII/SerDes, two 1G/2.5G SGMII/SerDes, and an
> + option for either a 1G/2.5G SGMII/SerDes Node Processor Interface (NPI) or a
> + PCIe interface for external CPU connectivity. The NPI/PCIe can operate as a
> + standard Ethernet port.
> +
> + The device provides a rich set of Industrial Ethernet switching features such
> + as fast protection switching, 1588 precision time protocol, and synchronous
> + Ethernet. Advanced TCAM-based VLAN and QoS processing enable delivery of
> + differentiated services. Security is assured through frame processing using
> + Microsemi’s TCAM-based Versatile Content Aware Processor.
> +
> + In addition, the device contains a powerful 500 MHz CPU enabling full
> + management of the switch.
> +
> +properties:
> + $nodename:
> + pattern: "^switch@[0-9a-f]+$"
> +
> + compatible:
> + const: mscc,vsc7514-switch
> +
> + reg:
> + items:
> + - description: system target
> + - description: rewriter target
> + - description: qs target
> + - description: PTP target
> + - description: Port0 target
> + - description: Port1 target
> + - description: Port2 target
> + - description: Port3 target
> + - description: Port4 target
> + - description: Port5 target
> + - description: Port6 target
> + - description: Port7 target
> + - description: Port8 target
> + - description: Port9 target
> + - description: Port10 target
> + - description: QSystem target
> + - description: Analyzer target
> + - description: S0 target
> + - description: S1 target
> + - description: S2 target
> + - description: fdma target
> +
> + reg-names:
> + items:
> + - const: sys
> + - const: rew
> + - const: qs
> + - const: ptp
> + - const: port0
> + - const: port1
> + - const: port2
> + - const: port3
> + - const: port4
> + - const: port5
> + - const: port6
> + - const: port7
> + - const: port8
> + - const: port9
> + - const: port10
> + - const: qsys
> + - const: ana
> + - const: s0
> + - const: s1
> + - const: s2
> + - const: fdma
> +
> + interrupts:
> + minItems: 1
> + items:
> + - description: PTP ready
> + - description: register based extraction
> + - description: frame dma based extraction
> +
> + interrupt-names:
> + minItems: 1
> + items:
> + - const: ptp_rdy
> + - const: xtr
> + - const: fdma
> +
> + ethernet-ports:
> + type: object

additionalProperties: false

> + patternProperties:
> + "^port@[0-9a-f]+$":
> + type: object
> + description: Ethernet ports handled by the switch
> +
> + allOf:

You can drop 'allOf'.

> + - $ref: ethernet-controller.yaml#

unevaluatedProperties: false

> +
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0

Wrong level for these.

> +
> + reg:
> + description: Switch port number
> +
> + phy-handle: true
> +
> + mac-address: true
> +
> + required:
> + - reg
> + - phy-handle
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - interrupt-names
> + - ethernet-ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + switch@1010000 {
> + compatible = "mscc,vsc7514-switch";
> + reg = <0x1010000 0x10000>,
> + <0x1030000 0x10000>,
> + <0x1080000 0x100>,
> + <0x10e0000 0x10000>,
> + <0x11e0000 0x100>,
> + <0x11f0000 0x100>,
> + <0x1200000 0x100>,
> + <0x1210000 0x100>,
> + <0x1220000 0x100>,
> + <0x1230000 0x100>,
> + <0x1240000 0x100>,
> + <0x1250000 0x100>,
> + <0x1260000 0x100>,
> + <0x1270000 0x100>,
> + <0x1280000 0x100>,
> + <0x1800000 0x80000>,
> + <0x1880000 0x10000>,
> + <0x1040000 0x10000>,
> + <0x1050000 0x10000>,
> + <0x1060000 0x10000>,
> + <0x1a0 0x1c4>;
> + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> + "port2", "port3", "port4", "port5", "port6",
> + "port7", "port8", "port9", "port10", "qsys",
> + "ana", "s0", "s1", "s2", "fdma";
> + interrupts = <18 21 16>;
> + interrupt-names = "ptp_rdy", "xtr", "fdma";
> +
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port0: port@0 {
> + reg = <0>;
> + phy-handle = <&phy0>;
> + };
> + port1: port@1 {
> + reg = <1>;
> + phy-handle = <&phy1>;
> + };
> + };
> + };
> +
> +...
> +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :

Please drop this.

emacs settings are fine, but not vim. ;) JK, I don't use either.

\
 
 \ /
  Last update: 2021-11-12 21:07    [W:0.190 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site